From: Stefan Eichenberger Date: Fri, 1 Mar 2024 08:49:00 +0000 (+0100) Subject: arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=566bbb018e415fe5d7f960b8003915bf8d8d1414;p=linux.git arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator The Verdin family has a signal called sleep-moci which can be used to turn off peripherals on the carrier board when the SoM goes into suspend. So far we have hogged this signal, which means the peripherals are always on and it is not possible to add peripherals that depend on the sleep-moci to be on. With this change, we replace the hog with a regulator so that peripherals can add their own regulators that use the same gpio. Carrier boards that allow peripherals to be powered off in suspend can disable this regulator and implement their own regulator to control the sleep-moci. Signed-off-by: Stefan Eichenberger Reviewed-by: Francesco Dolcini Link: https://lore.kernel.org/r/20240301084901.16656-2-eichest@gmail.com Signed-off-by: Nishanth Menon --- diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi index ff7cab0ff76c..2038c5e04639 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -138,6 +138,22 @@ vin-supply = <®_1v8>; }; + /* + * By default we enable CTRL_SLEEP_MOCI#, this is required to have + * peripherals on the carrier board powered. + * If more granularity or power saving is required this can be disabled + * in the carrier board device tree files. + */ + reg_force_sleep_moci: regulator-force-sleep-moci { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + regulator-name = "CTRL_SLEEP_MOCI#"; + }; + /* Verdin SD_1 Power Supply */ reg_sdhc1_vmmc: regulator-sdhci1 { compatible = "regulator-fixed"; @@ -985,14 +1001,6 @@ "", "", ""; - - verdin_ctrl_sleep_moci: ctrl-sleep-moci-hog { - gpio-hog; - /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ - gpios = <31 GPIO_ACTIVE_HIGH>; - line-name = "CTRL_SLEEP_MOCI#"; - output-high; - }; }; &main_gpio1 {