From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Wed, 1 Jul 2020 15:20:46 +0000 (+0300)
Subject: gpio: pch: Move IRQ status message to verbose debug level
X-Git-Tag: x86-urgent-2020-08-15~28^2~17^2~8
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=532e762d51d06291e3c40d5f7be8e42dce3b3d05;p=users%2Fdwmw2%2Flinux.git

gpio: pch: Move IRQ status message to verbose debug level

If one of the devices which share the same IRQ line doesn't care about
interrupt GPIO will spam the log with status equal to 0x00. Move IRQ
status message to verbose debug level (it still might be useful).

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---

diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index e96d28bf43b4d..adceee8263b28 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -304,9 +304,10 @@ static irqreturn_t pch_gpio_handler(int irq, void *dev_id)
 	unsigned long reg_val = ioread32(&chip->reg->istatus);
 	int i;
 
-	dev_dbg(chip->dev, "irq=%d  status=0x%lx\n", irq, reg_val);
+	dev_vdbg(chip->dev, "irq=%d  status=0x%lx\n", irq, reg_val);
 
 	reg_val &= BIT(gpio_pins[chip->ioh]) - 1;
+
 	for_each_set_bit(i, &reg_val, gpio_pins[chip->ioh])
 		generic_handle_irq(chip->irq_base + i);