From: Daniel Lezcano Date: Mon, 3 Oct 2022 09:25:56 +0000 (+0200) Subject: thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=52945c1c65fbc437a94eb0006561e7ff640cd8a8;p=users%2Fjedix%2Flinux-maple.git thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function The thermal framework gives the possibility to register the trip points with the thermal zone. When that is done, no get_trip_* ops are needed and they can be removed. Convert ops content logic into generic trip points and register them with the thermal zone. Signed-off-by: Daniel Lezcano Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20221003092602.1323944-24-daniel.lezcano@linaro.org --- diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c index 2c67841a1115..5485e59d03a9 100644 --- a/drivers/thermal/broadcom/bcm2835_thermal.c +++ b/drivers/thermal/broadcom/bcm2835_thermal.c @@ -18,6 +18,7 @@ #include #include +#include "../thermal_core.h" #include "../thermal_hwmon.h" #define BCM2835_TS_TSENSCTL 0x00 @@ -224,7 +225,8 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) */ val = readl(data->regs + BCM2835_TS_TSENSCTL); if (!(val & BCM2835_TS_TSENSCTL_RSTB)) { - int trip_temp, offset, slope; + struct thermal_trip trip; + int offset, slope; slope = thermal_zone_get_slope(tz); offset = thermal_zone_get_offset(tz); @@ -232,7 +234,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) * For now we deal only with critical, otherwise * would need to iterate */ - err = tz->ops->get_trip_temp(tz, 0, &trip_temp); + err = thermal_zone_get_trip(tz, 0, &trip); if (err < 0) { dev_err(&pdev->dev, "Not able to read trip_temp: %d\n", @@ -249,7 +251,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT); /* trip_adc value from info */ - val |= bcm2835_thermal_temp2adc(trip_temp, + val |= bcm2835_thermal_temp2adc(trip.temperature, offset, slope) << BCM2835_TS_TSENSCTL_THOLD_SHIFT;