From: Judith Mendez Date: Thu, 15 Aug 2024 20:48:33 +0000 (-0500) Subject: arm64: dts: ti: k3-am65: Add ESM nodes X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=50f368a0c166ebac9301b834aed729b2bb901e6a;p=linux.git arm64: dts: ti: k3-am65: Add ESM nodes Add Error Signaling Module (ESM) instances in MCU and MAIN domains, set ESM interrupt sources for rti as per TRM [0] 9.4 Interrupt Sources. There are no ESM0_ESM_INT* events routed to MCU ESM, so it is not possible to reset the CPU using watchdog and ESM0 configuration. However add ESM instances for device completion. Add comments to describe what interrupt sources are routed to ESM modules. [0] http://www.ti.com/lit/pdf/spruid7 Signed-off-by: Judith Mendez Reviewed-by: Bryan Brattlof Link: https://lore.kernel.org/r/20240815204833.452132-7-jm@ti.com Signed-off-by: Nishanth Menon --- diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 06ed74197f89..1f1af7ea2330 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -54,6 +54,14 @@ }; }; + main_esm: esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x700000 0x00 0x1000>; + bootph-pre-ram; + /* Interrupt sources: rti0, rti1, rti2, rti3 */ + ti,esm-pins = <224>, <225>, <226>, <227>; + }; + serdes0: serdes@900000 { compatible = "ti,phy-am654-serdes"; reg = <0x0 0x900000 0x0 0x2000>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 1a251d13f80a..7cf1f646500a 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -440,6 +440,14 @@ }; }; + mcu_esm: esm@40800000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x40800000 0x00 0x1000>; + bootph-pre-ram; + /* Interrupt sources: mrti0, mrti1 */ + ti,esm-pins = <104>, <105>; + }; + mcu_rti1: watchdog@40610000 { compatible = "ti,j7-rti-wdt"; reg = <0x0 0x40610000 0x0 0x100>;