From: Marek Vasut Date: Sun, 18 Aug 2024 20:29:52 +0000 (+0200) Subject: arm64: dts: imx8mm: Update Data Modul i.MX8M Mini eDM SBC DT to rev.A01 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=4a2fdc1691c5b594d8af3c2e50f46b86754a9c5c;p=linux.git arm64: dts: imx8mm: Update Data Modul i.MX8M Mini eDM SBC DT to rev.A01 Update the DT to match newest Data Modul i.MX8M Mini eDM SBC rev.A01 board which implements PHY changes. Keep some of the rev.900 PHY node in the DT so that a DTO can be used to support rev.900 boards easily. Signed-off-by: Marek Vasut Signed-off-by: Shawn Guo --- diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts index b1f2beb40a98..472c584fb3bd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts @@ -168,7 +168,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; - phy-handle = <&fec1_phy>; + phy-handle = <&fec1_phy_bcm>; phy-supply = <&buck4_reg>; fsl,magic-packet; status = "okay"; @@ -178,7 +178,7 @@ #size-cells = <0>; /* Atheros AR8031 PHY */ - fec1_phy: ethernet-phy@0 { + fec1_phy_ath: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; /* @@ -191,6 +191,7 @@ reset-deassert-us = <10000>; qca,keep-pll-enabled; vddio-supply = <&vddio>; + status = "disabled"; vddio: vddio-regulator { regulator-name = "VDDIO"; @@ -202,6 +203,20 @@ regulator-name = "VDDH"; }; }; + + /* Broadcom BCM54213PE PHY */ + fec1_phy_bcm: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + /* + * Dedicated ENET_INT# and ENET_WOL# signals are + * unused, the PHY does not provide cable detect + * interrupt. + */ + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + }; }; };