From: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Date: Sun, 13 May 2018 23:24:54 +0000 (-0300)
Subject: ARM: dts: vf-colibri-eval-v3: Use IRQ_TYPE specifier
X-Git-Tag: v4.18-rc1~50^2~24^2~12
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=3dc82c33dc2493861c3b50195f10f88a6d656c3b;p=linux.git

ARM: dts: vf-colibri-eval-v3: Use IRQ_TYPE specifier

GPIO_ACTIVE_LOW was being used to specify an interrupt, use
IRQ_TYPE_EDGE_RISING instead. This improves DT readability.

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index d8b2972527eb..e2da122a63f4 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -117,7 +117,7 @@
 		clocks = <&clk16m>;
 		spi-max-frequency = <10000000>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <11 GPIO_ACTIVE_LOW>;
+		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
 	};
 };