From: Barnabás Czémán <barnabas.czeman@mainlining.org>
Date: Tue, 30 Jul 2024 21:24:59 +0000 (+0200)
Subject: arm64: dts: qcom: pm8950: Add resin node
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=359c8c8491b5345bf49a4e79c07a76ab8e21f412;p=linux.git

arm64: dts: qcom: pm8950: Add resin node

Add pm8950 resin node as a feature of the PMIC it should be declared
in pm8950.dtsi, disabled by default. Like all other optional components
it can then by enabled and configured in the board-specific device tree
part.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20240730-pm8950_resin-v1-1-26de4d933f95@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---

diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
index f03095779de0..ed72c6101813 100644
--- a/arch/arm64/boot/dts/qcom/pm8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -18,7 +18,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pon@800 {
+		pm8950_pon: pon@800 {
 			compatible = "qcom,pm8916-pon";
 			reg = <0x0800>;
 			mode-bootloader = <0x2>;
@@ -31,6 +31,14 @@
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm8950_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		pm8950_temp: temp-alarm@2400 {