From: Fabio Estevam Date: Fri, 22 Nov 2024 16:43:08 +0000 (-0300) Subject: iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep() X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=2a8e34096ec70d73ebb6d9920688ea312700cbd9;p=users%2Fjedix%2Flinux-maple.git iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep() Using gpiod_set_value() to control the reset GPIO causes some verbose warnings during boot when the reset GPIO is controlled by an I2C IO expander. As the caller can sleep, use the gpiod_set_value_cansleep() variant to fix the issue. Tested on a custom i.MX93 board with a ADS124S08 ADC. Cc: stable@kernel.org Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code") Signed-off-by: Fabio Estevam Link: https://patch.msgid.link/20241122164308.390340-1-festevam@gmail.com Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c index 425b48d8986f5..f452f57f11c95 100644 --- a/drivers/iio/adc/ti-ads124s08.c +++ b/drivers/iio/adc/ti-ads124s08.c @@ -183,9 +183,9 @@ static int ads124s_reset(struct iio_dev *indio_dev) struct ads124s_private *priv = iio_priv(indio_dev); if (priv->reset_gpio) { - gpiod_set_value(priv->reset_gpio, 0); + gpiod_set_value_cansleep(priv->reset_gpio, 0); udelay(200); - gpiod_set_value(priv->reset_gpio, 1); + gpiod_set_value_cansleep(priv->reset_gpio, 1); } else { return ads124s_write_cmd(indio_dev, ADS124S08_CMD_RESET); }