From: Hsin-Yi Wang <hsinyi@chromium.org>
Date: Wed, 13 Jan 2021 11:03:59 +0000 (+0800)
Subject: arm64: dts: mt8183: config dsi node
X-Git-Tag: howlett/maple/20220722_2~3818^2~31^2~4
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=27eaf34df36419ead90801ef1ba73db287944158;p=users%2Fjedix%2Flinux-maple.git

arm64: dts: mt8183: config dsi node

Config dsi node for mt8183 kukui. Set panel and ports.

Several kukui boards share the same panel property and only compatible
is different. So compatible will be set in board dts for comparison
convenience.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Link: https://lore.kernel.org/r/20210113110400.616319-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
---

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
index 47113e275cb5..721d16f9c3b4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -16,3 +16,8 @@
 	model = "MediaTek krane sku176 board";
 	compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
 };
+
+&panel {
+        status = "okay";
+        compatible = "boe,tv101wum-nl6";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index ebd53755d538..ff56bcfa3370 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -249,6 +249,36 @@
 	proc-supply = <&mt6358_vproc11_reg>;
 };
 
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port {
+			dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
@@ -290,6 +320,10 @@
 	clock-frequency = <100000>;
 };
 
+&mipi_tx0 {
+	status = "okay";
+};
+
 &mmc0 {
 	status = "okay";
 	pinctrl-names = "default", "state_uhs";
@@ -547,6 +581,14 @@
 		};
 	};
 
+	panel_pins_default: panel_pins_default {
+		panel_reset {
+			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
+			output-low;
+			bias-pull-up;
+		};
+	};
+
 	pwm0_pin_default: pwm0_pin_default {
 		pins1 {
 			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;