From: Rob Herring (Arm) Date: Wed, 7 May 2025 15:44:02 +0000 (-0500) Subject: dt-bindings: serial: Convert marvell,armada-3700-uart to DT schema X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=2446bd692e33788835c2daf65eec385c53486404;p=users%2Fjedix%2Flinux-maple.git dt-bindings: serial: Convert marvell,armada-3700-uart to DT schema Convert the Marvell Armada-3700 UART binding to DT schema. It is a straight-forward conversion. Drop the long deprecated single interrupt support. Signed-off-by: "Rob Herring (Arm)" Link: https://lore.kernel.org/r/20250507154408.1595932-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/devicetree/bindings/serial/marvell,armada-3700-uart.yaml b/Documentation/devicetree/bindings/serial/marvell,armada-3700-uart.yaml new file mode 100644 index 0000000000000..6c7fa3d19369e --- /dev/null +++ b/Documentation/devicetree/bindings/serial/marvell,armada-3700-uart.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/marvell,armada-3700-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada-3700 UART + +maintainers: + - Pali Rohár + +description: + Marvell UART is a non standard UART used in some of Marvell EBU SoCs (e.g. + Armada-3700). + +properties: + compatible: + enum: + - marvell,armada-3700-uart + - marvell,armada-3700-uart-ext + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: + UART reference clock used to derive the baud rate. If absent, only fixed + baud rate from the bootloader is supported. + + interrupts: + minItems: 2 + items: + - description: UART sum interrupt + - description: UART TX interrupt + - description: UART RX interrupt + + interrupt-names: + minItems: 2 + maxItems: 3 + +required: + - compatible + - reg + - interrupts + - interrupt-names + +unevaluatedProperties: false + +allOf: + - $ref: /schemas/serial/serial.yaml# + - if: + properties: + compatible: + const: marvell,armada-3700-uart-ext + then: + properties: + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: uart-tx + - const: uart-rx + else: + properties: + interrupts: + minItems: 3 + + interrupt-names: + items: + - const: uart-sum + - const: uart-tx + - const: uart-rx + +examples: + - | + #include + + serial@12000 { + compatible = "marvell,armada-3700-uart"; + reg = <0x12000 0x18>; + clocks = <&uartclk 0>; + interrupts = + , + , + ; + interrupt-names = "uart-sum", "uart-tx", "uart-rx"; + }; + + - | + #include + + serial@12200 { + compatible = "marvell,armada-3700-uart-ext"; + reg = <0x12200 0x30>; + clocks = <&uartclk 1>; + interrupts = + , + ; + interrupt-names = "uart-tx", "uart-rx"; + }; diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt deleted file mode 100644 index a062bbca532c6..0000000000000 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Marvell UART : Non standard UART used in some of Marvell EBU SoCs - e.g., Armada-3700. - -Required properties: -- compatible: - - "marvell,armada-3700-uart" for the standard variant of the UART - (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the - FIFO), called also UART1. - - "marvell,armada-3700-uart-ext" for the extended variant of the - UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit - accesses to the FIFO), called also UART2. -- reg: offset and length of the register set for the device. -- clocks: UART reference clock used to derive the baudrate. If no clock - is provided (possible only with the "marvell,armada-3700-uart" - compatible string for backward compatibility), it will only work - if the baudrate was initialized by the bootloader and no baudrate - change will then be possible. When provided it should be UART1-clk - for standard variant of UART and UART2-clk for extended variant - of UART. TBG clock (with UART TBG divisors d1=d2=1) or xtal clock - should not be used and are supported only for backward compatibility. -- interrupts: - - Must contain three elements for the standard variant of the IP - (marvell,armada-3700-uart): "uart-sum", "uart-tx" and "uart-rx", - respectively the UART sum interrupt, the UART TX interrupt and - UART RX interrupt. A corresponding interrupt-names property must - be defined. - - Must contain two elements for the extended variant of the IP - (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx", - respectively the UART TX interrupt and the UART RX interrupt. A - corresponding interrupt-names property must be defined. - - For backward compatibility reasons, a single element interrupts - property is also supported for the standard variant of the IP, - containing only the UART sum interrupt. This form is deprecated - and should no longer be used. - -Example: - uart0: serial@12000 { - compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x18>; - clocks = <&uartclk 0>; - interrupts = - , - , - ; - interrupt-names = "uart-sum", "uart-tx", "uart-rx"; - }; - - uart1: serial@12200 { - compatible = "marvell,armada-3700-uart-ext"; - reg = <0x12200 0x30>; - clocks = <&uartclk 1>; - interrupts = - , - ; - interrupt-names = "uart-tx", "uart-rx"; - }; diff --git a/MAINTAINERS b/MAINTAINERS index 3cbf9ac0d83f6..d86c1d3097081 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14275,7 +14275,7 @@ MARVELL ARMADA 3700 SERIAL DRIVER M: Pali Rohár S: Maintained F: Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml -F: Documentation/devicetree/bindings/serial/mvebu-uart.txt +F: Documentation/devicetree/bindings/serial/marvell,armada-3700-uart.yaml F: drivers/tty/serial/mvebu-uart.c MARVELL ARMADA DRM SUPPORT