From: Marek Vasut <marek.vasut+renesas@mailbox.org>
Date: Sat, 7 Jun 2025 19:44:39 +0000 (+0200)
Subject: arm64: dts: renesas: sparrow-hawk: Describe split PCIe clock
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=20b02acbd89e4fc883670a7f7f517fc0a11bb5f7;p=users%2Fjedix%2Flinux-maple.git

arm64: dts: renesas: sparrow-hawk: Describe split PCIe clock

The Sparrow Hawk board supplies the PCIe controller input clock and PCIe
bus clock from separate outputs of the Renesas 9FGV0441 clock generator.
Describe this split bus configuration in the board DT.
The topology looks as follows:

     ____________                    _____________
    | R-Car PCIe |                  | PCIe device |
    |            |                  |             |
    |    PCIe RX<|==================|>PCIe TX     |
    |    PCIe TX<|==================|>PCIe RX     |
    |            |                  |             |
    |   PCIe CLK<|======..  ..======|>PCIe CLK    |
    '------------'      ||  ||      '-------------'
			||  ||
     ____________       ||  ||
    |  9FGV0441  |      ||  ||
    |            |      ||  ||
    |   CLK DIF0<|======''  ||
    |   CLK DIF1<|==========''
    |   CLK DIF2<|
    |   CLK DIF3<|
    '------------'

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/20250607194541.79176-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---

diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
index b8698e07add56..9ba23129e65ec 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
@@ -130,6 +130,13 @@
 		};
 	};
 
+	/* Page 26 / PCIe.0/1 CLK */
+	pcie_refclk: clk-x8 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
 	reg_1p2v: regulator-1p2v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.2V";
@@ -404,6 +411,14 @@
 			reg = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			/* Page 26 / PCIe.0/1 CLK */
+			pcie_clk: clk@68 {
+				compatible = "renesas,9fgv0441";
+				reg = <0x68>;
+				clocks = <&pcie_refclk>;
+				#clock-cells = <1>;
+			};
 		};
 
 		i2c0_mux3: i2c@3 {
@@ -487,26 +502,38 @@
 
 /* Page 26 / 2230 Key M M.2 */
 &pcie0_clkref {
-	clock-frequency = <100000000>;
+	status = "disabled";
 };
 
 &pciec0 {
+	clocks = <&cpg CPG_MOD 624>, <&pcie_clk 0>;
 	reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
+&pciec0_rp {
+	clocks = <&pcie_clk 1>;
+	vpcie3v3-supply = <&reg_3p3v>;
+};
+
 /* Page 25 / PCIe to USB */
 &pcie1_clkref {
-	clock-frequency = <100000000>;
+	status = "disabled";
 };
 
 &pciec1 {
+	clocks = <&cpg CPG_MOD 625>, <&pcie_clk 2>;
 	/* uPD720201 is PCIe Gen2 x1 device */
 	num-lanes = <1>;
 	reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
+&pciec1_rp {
+	clocks = <&pcie_clk 3>;
+	vpcie3v3-supply = <&reg_3p3v>;
+};
+
 &pfc {
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";