From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Mon, 18 Jan 2021 05:10:01 +0000 (+0530)
Subject: ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support
X-Git-Tag: howlett/maple/20220722_2~3818^2~11^2~16
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=20779ecf3b4309184d6df254e884698ef0cfd52c;p=users%2Fjedix%2Flinux-maple.git

ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support

Enable the support for USB3 controller, QMP PHY and HS PHY on SDX55 MTP.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118051005.55958-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
index 96b6a295f813a..7fec5e7a2724c 100644
--- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
@@ -111,7 +111,7 @@
 			regulator-max-microvolt = <1960000>;
 		};
 
-		ldo1 {
+		vreg_l1e_bb_1p2: ldo1 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
@@ -129,13 +129,13 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
 		};
 
-		ldo4 {
+		vreg_l4e_bb_0p875: ldo4 {
 			regulator-min-microvolt = <872000>;
 			regulator-max-microvolt = <872000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
 		};
 
-		ldo5 {
+		vreg_l5e_bb_1p7: ldo5 {
 			regulator-min-microvolt = <1704000>;
 			regulator-max-microvolt = <1900000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
@@ -165,7 +165,7 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
 		};
 
-		ldo10 {
+		vreg_l10e_3p1: ldo10 {
 			regulator-min-microvolt = <3088000>;
 			regulator-max-microvolt = <3088000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
@@ -228,3 +228,24 @@
 		nand-bus-width = <8>;
 	};
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+	vdda33-supply = <&vreg_l10e_3p1>;
+	vdda18-supply = <&vreg_l5e_bb_1p7>;
+};
+
+&usb_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
+	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+};