From: Bhupesh Sharma Date: Tue, 14 Mar 2023 08:36:33 +0000 (+0530) Subject: arm64: dts: qcom: sm6115: Move USB node's 'maximum-speed' and 'dr_mode' properties... X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=1f1e512288edf0ef99d9ceb9af29e2e004341ced;p=users%2Fjedix%2Flinux-maple.git arm64: dts: qcom: sm6115: Move USB node's 'maximum-speed' and 'dr_mode' properties to dts Normally the 'maximum-speed' and 'dr_mode' properties of a USB controller + port is dependent on the type of the ports, regulators and mode change interrupt routing available on the board(s). So, move the same from the sm6115 dtsi file to respective board file(s). Reviewed-by: Konrad Dybcio Signed-off-by: Bhupesh Sharma Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230314083633.1882214-3-bhupesh.sharma@linaro.org --- diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index fa57f4bf5825..3f39f25e0721 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -229,6 +229,11 @@ status = "okay"; }; +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + &usb_hsphy { vdd-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l12a>; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 86d26a782654..fdad0f13e064 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1129,8 +1129,6 @@ snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; - maximum-speed = "high-speed"; - dr_mode = "peripheral"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index 20a51e164d2a..10c9d338446c 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -277,6 +277,11 @@ status = "okay"; }; +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + &usb_hsphy { vdd-supply = <&pm6125_l4>; vdda-pll-supply = <&pm6125_l12>;