From: Alexey Klimov Date: Tue, 12 Nov 2024 02:53:06 +0000 (+0000) Subject: arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=1caf6149c3bf41a2ee07869449c4ea1ec8bbc2f8;p=users%2Fwilly%2Fxarray.git arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support Add sound node and dsp-related piece to enable HDMI audio playback support on Qualcomm QRB4210 RB2 board. That is the only sound output supported for now. The audio playback is verified using the following commands: amixer -c0 cset iface=MIXER,name='SEC_MI2S_RX Audio Mixer MultiMedia1' 1 aplay -D hw:0,0 /usr/share/sounds/alsa/Front_Center.wav Cc: Srinivas Kandagatla Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Signed-off-by: Alexey Klimov Link: https://lore.kernel.org/r/20241112025306.712122-5-alexey.klimov@linaro.org Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index d8d4cff7d5ab..52db18847803 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -6,6 +6,8 @@ /dts-v1/; #include +#include +#include #include #include "sm4250.dtsi" #include "pm6125.dtsi" @@ -103,6 +105,55 @@ }; }; + sound { + compatible = "qcom,qrb4210-rb2-sndcard"; + pinctrl-0 = <&lpi_i2s2_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB2-WSA8815-Speakers-DMIC0"; + audio-routing = "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + + cpu { + sound-dai = <&q6afedai SECONDARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + }; + vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 { compatible = "regulator-fixed"; regulator-name = "VREG_HDMI_OUT_1P2"; @@ -318,6 +369,14 @@ status = "okay"; }; +/* SECONDARY I2S uses 1 I2S SD Line for audio on LT9611UXC HDMI Bridge */ +&q6afedai { + dai@20 { + reg = ; + qcom,sd-lines = <0>; + }; +}; + &qupv3_id_0 { status = "okay"; };