From: Paolo Abeni Date: Thu, 28 Aug 2025 12:51:09 +0000 (+0200) Subject: Merge branch 'fbnic-synchronize-address-handling-with-bmc' X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=14cd01c28fb1e77d9bb55bd43fd8df6d584e284a;p=users%2Fhch%2Fmisc.git Merge branch 'fbnic-synchronize-address-handling-with-bmc' Alexander Duyck says: ==================== fbnic: Synchronize address handling with BMC The fbnic driver needs to communicate with the BMC if it is operating on the RMII-based transport (RBT) of the same port the host is on. To enable this we need to add rules that will route BMC traffic to the RBT/BMC and the BMC and firmware need to configure rules on the RBT side of the interface to route traffic from the BMC to the host instead of the MAC. To enable that this patch set addresses two issues. First it will cause the TCAM to be reconfigured in the event that the BMC was not previously present when the driver was loaded, but the FW sends a notification that the FW capabilities have changed and a BMC w/ various MAC addresses is now present. Second it adds support for sending a message to the firmware so that if the host adds additional MAC addresses the FW can be made aware and route traffic for those addresses from the RBT to the host instead of the MAC. ==================== Link: https://patch.msgid.link/175623715978.2246365.7798520806218461199.stgit@ahduyck-xeon-server.home.arpa Signed-off-by: Paolo Abeni --- 14cd01c28fb1e77d9bb55bd43fd8df6d584e284a