From: Adam Ford Date: Thu, 12 Jun 2025 00:39:22 +0000 (-0500) Subject: arm64: dts: imx8mp: Configure VPU clocks for overdrive X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=0b249223fdce3af039f074457232b4f1c9c5d39e;p=users%2Fjedix%2Flinux-maple.git arm64: dts: imx8mp: Configure VPU clocks for overdrive The defaults for this SoC are configured for overdrive mode, but the VPU clocks are currently configured for nominal mode. Increase VPU_G1_CLK_ROOT to 800MHZ from 600MHz, Increase VPU_G2_CLK_ROOT to 700MHZ from 500MHz, and Increase VPU_BUS_CLK_ROOT to 800MHz from 600MHz. This requires adjusting the clock parents. Since there is already 800MHz clock references, move the VPU_BUS and G1 clocks to it. This frees up the VPU_PLL to be configured at 700MHz to run the G2 clock at 700MHz. Signed-off-by: Adam Ford Reviewed-by: Marco Felsch Signed-off-by: Shawn Guo --- diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 43b0d8e1f4b95..bb24dba7338ea 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -2264,8 +2264,8 @@ interrupts = ; clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>; - assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; - assigned-clock-rates = <600000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>; power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>; }; @@ -2274,9 +2274,9 @@ reg = <0x38310000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; - assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; - assigned-clock-rates = <500000000>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>, <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <700000000>, <700000000>; power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>; }; @@ -2291,9 +2291,9 @@ <&clk IMX8MP_CLK_VPU_G2_ROOT>, <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; clock-names = "g1", "g2", "vc8000e"; - assigned-clocks = <&clk IMX8MP_VPU_PLL>, <&clk IMX8MP_CLK_VPU_BUS>; - assigned-clock-parents = <0>, <&clk IMX8MP_VPU_PLL_OUT>; - assigned-clock-rates = <600000000>, <600000000>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>; interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;