From: Kunihiko Hayashi Date: Thu, 22 Apr 2021 17:31:49 +0000 (+0900) Subject: arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E X-Git-Tag: v5.4.119~18 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=06e03b867d96b3c0ef028b94fac99fd864218ccc;p=users%2Fdwmw2%2Flinux.git arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E [ Upstream commit dcabb06bf127b3e0d3fbc94a2b65dd56c2725851 ] UniPhier LD20 and PXs3 boards have RTL8211E ethernet phy, and the phy have the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY pins. After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the delays are working correctly, however, "rgmii" means no delay and the phy doesn't work. So need to set the phy-mode to "rgmii-id" to show that RX/TX delays are enabled. Fixes: c73730ee4c9a ("arm64: dts: uniphier: add AVE ethernet node") Signed-off-by: Kunihiko Hayashi Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index b658f2b641e29..3348a32f7d0b8 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -718,7 +718,7 @@ clocks = <&sys_clk 6>; reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 0>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index d6f6cee4d5491..6537c69de3dd3 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -509,7 +509,7 @@ clocks = <&sys_clk 6>; reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 0>; @@ -530,7 +530,7 @@ clocks = <&sys_clk 7>; reset-names = "ether"; resets = <&sys_rst 7>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 1>;