From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Tue, 9 Apr 2024 11:42:09 +0000 (+0200)
Subject: arm64: dts: mediatek: mt8395-nio-12l: Define RSEL in microamperes
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=048a70e3141a660d116bb86fe7e158235a9c4656;p=linux.git

arm64: dts: mediatek: mt8395-nio-12l: Define RSEL in microamperes

The paris pinctrl driver supports specifying the RSEL drive strength
in microamperes as well as internal bits definitions: choose to specify
those in uA to avoid using hardware specific values in device trees.

Link: https://lore.kernel.org/r/20240409114211.310462-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---

diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index 97634cc04e65..abd6612b8624 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -434,6 +434,8 @@
 };
 
 &pio {
+	mediatek,rsel-resistance-in-si-unit;
+
 	eth_default_pins: eth-default-pins {
 		pins-cc {
 			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
@@ -509,7 +511,7 @@
 		pins-bus {
 			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
 				 <PINMUX_GPIO13__FUNC_SCL2>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			bias-pull-up = <1000>;
 			drive-strength = <6>;
 			drive-strength-microamp = <1000>;
 		};
@@ -519,7 +521,7 @@
 		pins-bus {
 			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
 				 <PINMUX_GPIO17__FUNC_SCL4>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			bias-pull-up = <1000>;
 			drive-strength-microamp = <1000>;
 		};
 	};