From: Cristian Ciocaltea Date: Tue, 18 Mar 2025 12:35:37 +0000 (+0200) Subject: phy: rockchip: samsung-hdptx: Fix clock ratio setup X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=0422253ac1919fea8292381c85f11a9decff1bb1;p=users%2Fwilly%2Fxarray.git phy: rockchip: samsung-hdptx: Fix clock ratio setup The switch from 1/10 to 1/40 clock ratio must happen when exceeding the 340 MHz rate limit of HDMI 1.4, i.e. when entering the HDMI 2.0 domain, and not before. Therefore, use the correct comparison operator '>' instead of '>=' when checking the max rate. While at it, introduce a define for this rate limit constant. Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver") Reviewed-by: Dmitry Baryshkov Signed-off-by: Cristian Ciocaltea Link: https://lore.kernel.org/r/20250318-phy-sam-hdptx-bpc-v6-3-8cb1678e7663@collabora.com Signed-off-by: Vinod Koul --- diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c index fe7c05748356..34a7ef209364 100644 --- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c +++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c @@ -320,6 +320,7 @@ #define LN3_TX_SER_RATE_SEL_HBR2_MASK BIT(3) #define LN3_TX_SER_RATE_SEL_HBR3_MASK BIT(2) +#define HDMI14_MAX_RATE 340000000 #define HDMI20_MAX_RATE 600000000 enum dp_link_rate { @@ -1072,7 +1073,7 @@ static int rk_hdptx_ropll_tmds_mode_config(struct rk_hdptx_phy *hdptx, regmap_write(hdptx->regmap, LNTOP_REG(0200), 0x06); - if (rate >= 3400000) { + if (rate > HDMI14_MAX_RATE / 100) { /* For 1/40 bitrate clk */ rk_hdptx_multi_reg_write(hdptx, rk_hdtpx_tmds_lntop_highbr_seq); } else {