From: Andrew Davis Date: Fri, 28 Jun 2024 15:15:17 +0000 (-0500) Subject: arm64: dts: ti: k3-am62a: Add cpsw-mac-efuse node to wkup_conf X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=00d20114b515b4697af228cf3c01120ca1335270;p=linux.git arm64: dts: ti: k3-am62a: Add cpsw-mac-efuse node to wkup_conf The WKUP system controller address region contains an eFuse block with MAC addresses to be used by the Ethernet controller. The property “ti,syscon-efuse” contains a phandle to a syscon region and an offset into this region where the MAC addresses can be found. Currently "ti,syscon-efuse" points to the entire system controller address space node with an offset to the eFuse IP address. Instead add a cpsw-mac-efuse node to describe the exact eFuse area. Then point the Ethernet controller directly to this region, no offset needed. This makes it so the system controller memory area does not need to be one big syscon area, describe this bus address area as the simple-bus it is. Signed-off-by: Andrew Davis Link: https://lore.kernel.org/r/20240628151518.40100-7-afd@ti.com Signed-off-by: Vignesh Raghavendra --- diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index ae9560632fbe..916fcf3cc57d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -739,7 +739,7 @@ label = "port1"; phys = <&phy_gmii_sel 1>; mac-address = [00 00 00 00 00 00]; - ti,syscon-efuse = <&wkup_conf 0x200>; + ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; }; cpsw_port2: port@2 { diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi index 5c5aca4bb925..f5ac101a04df 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi @@ -6,9 +6,8 @@ */ &cbass_wakeup { - wkup_conf: syscon@43000000 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00 0x43000000 0x00 0x20000>; + wkup_conf: bus@43000000 { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00 0x00 0x43000000 0x20000>; @@ -18,6 +17,11 @@ reg = <0x14 0x4>; }; + cpsw_mac_syscon: ethernet-mac-syscon@200 { + compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; + reg = <0x200 0x8>; + }; + usb0_phy_ctrl: syscon@4008 { compatible = "ti,am62-usb-phy-ctrl", "syscon"; reg = <0x4008 0x4>;