arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio

The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:

    ./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
        From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml

Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.

Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 1bcf228a22b8b3d21585fe338cb2eafa5127830f..852420349c01332544247d5de35acdfd0ee71d82 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -121,8 +121,6 @@
        phy-handle = <&ethphy0>;
        nvmem-cells = <&fec_mac1>;
        nvmem-cell-names = "mac-address";
-       snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
-       snps,reset-delays-us = <10 20 200000>;
        status = "okay";
 
        mdio {
@@ -136,6 +134,9 @@
                        eee-broken-1000t;
                        qca,disable-smarteee;
                        qca,disable-hibernation-mode;
+                       reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+                       reset-assert-us = <20>;
+                       reset-deassert-us = <200000>;
                        vddio-supply = <&vddio0>;
 
                        vddio0: vddio-regulator {