[media] anysee: add support for Anysee E7 PS2

Basically it is just same device as Anysee E7 S2 but made for
internal PCI(e) slot and motherboard USB connector.

Cc: info@anysee.com
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 49028aeb563022414c8aabb1366f96d34f57def9..a4a5361cf0665d35d6d8814a6272c5920e90e06a 100644 (file)
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -434,6 +434,14 @@ static struct isl6423_config anysee_isl6423_config = {
  * IOD[5] TDA10023 0=disabled
  * IOD[6] ZL10353 1=enabled
  * IOE[0] IF 0=enabled
+ *
+ * E7 S2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
+ * PCB: 508PS2 (rev0.4)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
  */
 
 static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
@@ -667,7 +675,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 
                break;
        case ANYSEE_HW_508S2: /* 19 */
+       case ANYSEE_HW_508PS2: /* 22 */
                /* E7 S2 */
+               /* E7 PS2 */
 
                /* enable transport stream on IOA[7] */
                ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
@@ -794,7 +804,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 
                break;
        case ANYSEE_HW_508S2: /* 19 */
+       case ANYSEE_HW_508PS2: /* 22 */
                /* E7 S2 */
+               /* E7 PS2 */
 
                /* attach tuner */
                fe = dvb_attach(stv6110_attach, adap->fe,

diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
index 3bec60c5565f6f45f2c6d86a18acdea2e2bf6a56..24ce5e656e54f286497546067c0791006770168e 100644 (file)
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -69,6 +69,7 @@ struct anysee_state {
 #define ANYSEE_HW_508TC  18 /* E7 TC */
 #define ANYSEE_HW_508S2  19 /* E7 S2 */
 #define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */
+#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */
 
 #define REG_IOA       0x80 /* Port A (bit addressable) */
 #define REG_IOB       0x90 /* Port B (bit addressable) */