c/r: prctl: extend PR_SET_MM to set up more mm_struct entries

During checkpoint we dump whole process memory to a file and the dump
includes process stack memory.  But among stack data itself, the stack
carries additional parameters such as command line arguments, environment
data and auxiliary vector.

So when we do restore procedure and once we've restored stack data itself
we need to setup mm_struct::arg_start/end, env_start/end, so restored
process would be able to find command line arguments and environment data
it had at checkpoint time.  The same applies to auxiliary vector.

For this reason additional PR_SET_MM_(ARG_START | ARG_END | ENV_START |
ENV_END | AUXV) codes are introduced.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/include/linux/prctl.h b/include/linux/prctl.h
index 78b76e24cc7eed661d7696200c4c4f2291425a0d..18d84c4b42d8b9f25b355beeeae628fe6442865f 100644 (file)
--- a/include/linux/prctl.h
+++ b/include/linux/prctl.h
@@ -113,6 +113,11 @@
 # define PR_SET_MM_START_STACK         5
 # define PR_SET_MM_START_BRK           6
 # define PR_SET_MM_BRK                 7
+# define PR_SET_MM_ARG_START           8
+# define PR_SET_MM_ARG_END             9
+# define PR_SET_MM_ENV_START           10
+# define PR_SET_MM_ENV_END             11
+# define PR_SET_MM_AUXV                        12
 
 /*
  * Set specific pid that is allowed to ptrace the current task.

diff --git a/kernel/sys.c b/kernel/sys.c
index 6e81aa7e4688af8d10791415836990f24ff3a461..8b544972e46efa01e152b08b08e0baa5855e1046 100644 (file)
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1784,17 +1784,23 @@ SYSCALL_DEFINE1(umask, int, mask)
 }
 
 #ifdef CONFIG_CHECKPOINT_RESTORE
+static bool vma_flags_mismatch(struct vm_area_struct *vma,
+                              unsigned long required,
+                              unsigned long banned)
+{
+       return (vma->vm_flags & required) != required ||
+               (vma->vm_flags & banned);
+}
+
 static int prctl_set_mm(int opt, unsigned long addr,
                        unsigned long arg4, unsigned long arg5)
 {
        unsigned long rlim = rlimit(RLIMIT_DATA);
-       unsigned long vm_req_flags;
-       unsigned long vm_bad_flags;
-       struct vm_area_struct *vma;
-       int error = 0;
        struct mm_struct *mm = current->mm;
+       struct vm_area_struct *vma;
+       int error;
 
-       if (arg4 | arg5)
+       if (arg5 || (arg4 && opt != PR_SET_MM_AUXV))
                return -EINVAL;
 
        if (!capable(CAP_SYS_RESOURCE))
@@ -1803,58 +1809,23 @@ static int prctl_set_mm(int opt, unsigned long addr,
        if (addr >= TASK_SIZE)
                return -EINVAL;
 
+       error = -EINVAL;
+
        down_read(&mm->mmap_sem);
        vma = find_vma(mm, addr);
 
-       if (opt != PR_SET_MM_START_BRK && opt != PR_SET_MM_BRK) {
-               /* It must be existing VMA */
-               if (!vma || vma->vm_start > addr)
-                       goto out;
-       }
-
-       error = -EINVAL;
        switch (opt) {
        case PR_SET_MM_START_CODE:
+               mm->start_code = addr;
+               break;
        case PR_SET_MM_END_CODE:
-               vm_req_flags = VM_READ | VM_EXEC;
-               vm_bad_flags = VM_WRITE | VM_MAYSHARE;
-
-               if ((vma->vm_flags & vm_req_flags) != vm_req_flags ||
-                   (vma->vm_flags & vm_bad_flags))
-                       goto out;
-
-               if (opt == PR_SET_MM_START_CODE)
-                       mm->start_code = addr;
-               else
-                       mm->end_code = addr;
+               mm->end_code = addr;
                break;
-
        case PR_SET_MM_START_DATA:
-       case PR_SET_MM_END_DATA:
-               vm_req_flags = VM_READ | VM_WRITE;
-               vm_bad_flags = VM_EXEC | VM_MAYSHARE;
-
-               if ((vma->vm_flags & vm_req_flags) != vm_req_flags ||
-                   (vma->vm_flags & vm_bad_flags))
-                       goto out;
-
-               if (opt == PR_SET_MM_START_DATA)
-                       mm->start_data = addr;
-               else
-                       mm->end_data = addr;
+               mm->start_data = addr;
                break;
-
-       case PR_SET_MM_START_STACK:
-
-#ifdef CONFIG_STACK_GROWSUP
-               vm_req_flags = VM_READ | VM_WRITE | VM_GROWSUP;
-#else
-               vm_req_flags = VM_READ | VM_WRITE | VM_GROWSDOWN;
-#endif
-               if ((vma->vm_flags & vm_req_flags) != vm_req_flags)
-                       goto out;
-
-               mm->start_stack = addr;
+       case PR_SET_MM_END_DATA:
+               mm->end_data = addr;
                break;
 
        case PR_SET_MM_START_BRK:
@@ -1881,16 +1852,77 @@ static int prctl_set_mm(int opt, unsigned long addr,
                mm->brk = addr;
                break;
 
+       /*
+        * If command line arguments and environment
+        * are placed somewhere else on stack, we can
+        * set them up here, ARG_START/END to setup
+        * command line argumets and ENV_START/END
+        * for environment.
+        */
+       case PR_SET_MM_START_STACK:
+       case PR_SET_MM_ARG_START:
+       case PR_SET_MM_ARG_END:
+       case PR_SET_MM_ENV_START:
+       case PR_SET_MM_ENV_END:
+               if (!vma) {
+                       error = -EFAULT;
+                       goto out;
+               }
+#ifdef CONFIG_STACK_GROWSUP
+               if (vma_flags_mismatch(vma, VM_READ | VM_WRITE | VM_GROWSUP, 0))
+#else
+               if (vma_flags_mismatch(vma, VM_READ | VM_WRITE | VM_GROWSDOWN, 0))
+#endif
+                       goto out;
+               if (opt == PR_SET_MM_START_STACK)
+                       mm->start_stack = addr;
+               else if (opt == PR_SET_MM_ARG_START)
+                       mm->arg_start = addr;
+               else if (opt == PR_SET_MM_ARG_END)
+                       mm->arg_end = addr;
+               else if (opt == PR_SET_MM_ENV_START)
+                       mm->env_start = addr;
+               else if (opt == PR_SET_MM_ENV_END)
+                       mm->env_end = addr;
+               break;
+
+       /*
+        * This doesn't move auxiliary vector itself
+        * since it's pinned to mm_struct, but allow
+        * to fill vector with new values. It's up
+        * to a caller to provide sane values here
+        * otherwise user space tools which use this
+        * vector might be unhappy.
+        */
+       case PR_SET_MM_AUXV: {
+               unsigned long user_auxv[AT_VECTOR_SIZE];
+
+               if (arg4 > sizeof(user_auxv))
+                       goto out;
+               up_read(&mm->mmap_sem);
+
+               if (copy_from_user(user_auxv, (const void __user *)addr, arg4))
+                       return -EFAULT;
+
+               /* Make sure the last entry is always AT_NULL */
+               user_auxv[AT_VECTOR_SIZE - 2] = 0;
+               user_auxv[AT_VECTOR_SIZE - 1] = 0;
+
+               BUILD_BUG_ON(sizeof(user_auxv) != sizeof(mm->saved_auxv));
+
+               task_lock(current);
+               memcpy(mm->saved_auxv, user_auxv, arg4);
+               task_unlock(current);
+
+               return 0;
+       }
        default:
-               error = -EINVAL;
                goto out;
        }
 
        error = 0;
-
 out:
        up_read(&mm->mmap_sem);
-
        return error;
 }
 #else /* CONFIG_CHECKPOINT_RESTORE */