}
}
+static const char * const generic_status[] = {
+ [NVME_SC_SUCCESS] = "Successful Completion: The command completed without error",
+ [NVME_SC_INVALID_OPCODE] = "Invalid Command Opcode: A reserved coded value or an unsupported value in the command opcode field",
+ [NVME_SC_INVALID_FIELD] = "Invalid Field in Command: A reserved coded value or an unsupported value in a defined field",
+ [NVME_SC_CMDID_CONFLICT] = "Command ID Conflict: The command identifier is already in use",
+ [NVME_SC_DATA_XFER_ERROR] = "Data Transfer Error: Transferring the data or metadata associated with a command experienced an error",
+ [NVME_SC_POWER_LOSS] = "Commands Aborted due to Power Loss Notification: Indicates that the command was aborted due to a power loss notification",
+ [NVME_SC_INTERNAL] = "Internal Error: The command was not completed successfully due to an internal error",
+ [NVME_SC_ABORT_REQ] = "Command Abort Requested: The command was aborted due to an Abort command",
+ [NVME_SC_ABORT_QUEUE] = "Command Aborted due to SQ Deletion: The command was aborted due to a Delete I/O Submission Queue",
+ [NVME_SC_FUSED_FAIL] = "Command Aborted due to Failed Fused Command: The command was aborted due to the other command in a fused operation failing",
+ [NVME_SC_FUSED_MISSING] = "Command Aborted due to Missing Fused Command: The fused command was aborted due to the adjacent submission queue entry not containing a fused command",
+ [NVME_SC_INVALID_NS] = "Invalid Namespace or Format: The namespace or the format of that namespace is invalid",
+ [NVME_SC_CMD_SEQ_ERROR] = "Command Sequence Error: The command was aborted due to a protocol violation in a multi- command sequence",
+ [NVME_SC_SGL_INVALID_LAST] = "Invalid SGL Segment Descriptor: The command includes an invalid SGL Last Segment or SGL Segment descriptor",
+ [NVME_SC_SGL_INVALID_COUNT] = "Invalid Number of SGL Descriptors: There is an SGL Last Segment descriptor or an SGL Segment descriptor in a location other than the last descriptor of a segment based on the length indicated",
+ [NVME_SC_SGL_INVALID_DATA] = "Data SGL Length Invalid: The length of a Data SGL is too short or too long and the controller does not support SGL transfers longer than the amount of data to be transferred",
+ [NVME_SC_SGL_INVALID_METADATA] = "Metadata SGL Length Invalid: The length of a Metadata SGL is too short or too long and the controller does not support SGL transfers longer than the amount of data to be transferred",
+ [NVME_SC_SGL_INVALID_TYPE] = "SGL Descriptor Type Invalid: The type of an SGL Descriptor is a type that is not supported by the controller",
+ [NVME_SC_CMB_INVALID_USE] = "Invalid Use of Controller Memory Buffer: The attempted use of the Controller Memory Buffer is not supported by the controller",
+ [NVME_SC_PRP_INVALID_OFFSET] = "PRP Offset Invalid: The Offset field for a PRP entry is invalid",
+ [NVME_SC_AWU_EXCEEDED] = "Atomic Write Unit Exceeded: The length specified exceeds the atomic write unit size",
+ [NVME_SC_OP_DENIED] = "Operation Denied: The command was denied due to lack of access rights",
+ [NVME_SC_SGL_INVALID_OFFSET] = "SGL Offset Invalid: The offset specified in a descriptor is invalid",
+ [NVME_SC_HOSTID_FORMAT] = "Host Identifier Inconsistent Format: The NVM subsystem detected the simultaneous use of 64- bit and 128-bit Host Identifier values on different controllers",
+ [NVME_SC_KAT_EXPIRED] = "Keep Alive Timer Expired: The Keep Alive Timer expired",
+ [NVME_SC_KAT_INVALID] = "Keep Alive Timeout Invalid: The Keep Alive Timeout value specified is invalid",
+ [NVME_SC_CMD_ABORTED_PREMEPT] = "Command Aborted due to Preempt and Abort: The command was aborted due to a Reservation Acquire command",
+ [NVME_SC_SANITIZE_FAILED] = "Sanitize Failed: The most recent sanitize operation failed and no recovery action has been successfully completed",
+ [NVME_SC_SANITIZE_IN_PROGRESS] = "Sanitize In Progress: The requested function is prohibited while a sanitize operation is in progress",
+ [NVME_SC_SGL_INVALID_GRANULARITY] = "SGL Data Block Granularity Invalid: The Address alignment or Length granularity for an SGL Data Block descriptor is invalid",
+ [NVME_SC_CMD_IN_CMBQ_NOT_SUPP] = "Command Not Supported for Queue in CMB: The controller does not support Submission Queue in the Controller Memory Buffer or Completion Queue in the Controller Memory Buffer",
+ [NVME_SC_NS_WRITE_PROTECTED] = "Namespace is Write Protected: The command is prohibited while the namespace is write protected",
+ [NVME_SC_CMD_INTERRUPTED] = "Command Interrupted: Command processing was interrupted and the controller is unable to successfully complete the command",
+ [NVME_SC_TRAN_TPORT_ERROR] = "Transient Transport Error: A transient transport error was detected",
+ [NVME_SC_LBA_RANGE] = "LBA Out of Range: The command references an LBA that exceeds the size of the namespace",
+ [NVME_SC_CAP_EXCEEDED] = "Capacity Exceeded: Execution of the command has caused the capacity of the namespace to be exceeded",
+ [NVME_SC_NS_NOT_READY] = "Namespace Not Ready: The namespace is not ready to be accessed",
+ [NVME_SC_RESERVATION_CONFLICT] = "Reservation Conflict: The command was aborted due to a conflict with a reservation held on the accessed namespace",
+ [NVME_SC_FORMAT_IN_PROGRESS] = "Format In Progress: A Format NVM command is in progress on the namespace",
+};
+
+static const char * const cmd_spec_status[] = {
+ [NVME_SC_CQ_INVALID] = "Completion Queue Invalid: The Completion Queue identifier specified in the command does not exist",
+ [NVME_SC_QID_INVALID] = "Invalid Queue Identifier: The creation of the I/O Completion Queue failed due to an invalid queue identifier specified as part of the command",
+ [NVME_SC_QUEUE_SIZE] = "Invalid Queue Size: The host attempted to create an I/O Completion Queue with an invalid number of entries",
+ [NVME_SC_ABORT_LIMIT] = "Abort Command Limit Exceeded: The number of concurrently outstanding Abort commands has exceeded the limit indicated in the Identify Controller data structure",
+ [NVME_SC_ASYNC_LIMIT] = "Asynchronous Event Request Limit Exceeded: The number of concurrently outstanding Asynchronous Event Request commands has been exceeded",
+ [NVME_SC_FIRMWARE_SLOT] = "Invalid Firmware Slot: The firmware slot indicated is invalid or read only",
+ [NVME_SC_FIRMWARE_IMAGE] = "Invalid Firmware Image: The firmware image specified for activation is invalid and not loaded by the controller",
+ [NVME_SC_INVALID_VECTOR] = "Invalid Interrupt Vector: The creation of the I/O Completion Queue failed due to an invalid interrupt vector specified as part of the command",
+ [NVME_SC_INVALID_LOG_PAGE] = "Invalid Log Page: The log page indicated is invalid",
+ [NVME_SC_INVALID_FORMAT] = "Invalid Format: The LBA Format specified is not supported",
+ [NVME_SC_FW_NEEDS_CONV_RESET] = "Firmware Activation Requires Conventional Reset: The firmware commit was successful, however, activation of the firmware image requires a conventional reset",
+ [NVME_SC_INVALID_QUEUE] = "Invalid Queue Deletion: Invalid I/O Completion Queue specified to delete",
+ [NVME_SC_FEATURE_NOT_SAVEABLE] = "Feature Identifier Not Saveable: The Feature Identifier specified does not support a saveable value",
+ [NVME_SC_FEATURE_NOT_CHANGEABLE] = "Feature Not Changeable: The Feature Identifier is not able to be changed",
+ [NVME_SC_FEATURE_NOT_PER_NS] = "Feature Not Namespace Specific: The Feature Identifier specified is not namespace specific",
+ [NVME_SC_FW_NEEDS_SUBSYS_RESET] = "Firmware Activation Requires NVM Subsystem Reset: The firmware commit was successful, however, activation of the firmware image requires an NVM Subsystem",
+ [NVME_SC_FW_NEEDS_RESET] = "Firmware Activation Requires Controller Level Reset: The firmware commit was successful; however, the image specified does not support being activated without a reset",
+ [NVME_SC_FW_NEEDS_MAX_TIME] = "Firmware Activation Requires Maximum Time Violation: The image specified if activated immediately would exceed the Maximum Time for Firmware Activation (MTFA) value reported in Identify Controller",
+ [NVME_SC_FW_ACTIVATE_PROHIBITED] = "Firmware Activation Prohibited: The image specified is being prohibited from activation by the controller for vendor specific reasons",
+ [NVME_SC_OVERLAPPING_RANGE] = "Overlapping Range: The downloaded firmware image has overlapping ranges",
+ [NVME_SC_NS_INSUFFICIENT_CAP] = "Namespace Insufficient Capacity: Creating the namespace requires more free space than is currently available",
+ [NVME_SC_NS_ID_UNAVAILABLE] = "Namespace Identifier Unavailable: The number of namespaces supported has been exceeded",
+ [NVME_SC_NS_ALREADY_ATTACHED] = "Namespace Already Attached: The controller is already attached to the namespace specified",
+ [NVME_SC_NS_IS_PRIVATE] = "Namespace Is Private: The namespace is private and is already attached to one controller",
+ [NVME_SC_NS_NOT_ATTACHED] = "Namespace Not Attached: The request to detach the controller could not be completed because the controller is not attached to the namespace",
+ [NVME_SC_THIN_PROV_NOT_SUPP] = "Thin Provisioning Not Supported: Thin provisioning is not supported by the controller",
+ [NVME_SC_CTRL_LIST_INVALID] = "Controller List Invalid: The controller list provided contains invalid controller ids",
+ [NVME_SC_SELF_TEST_IN_PROGRESS] = "Device Self-test In Progress",
+ [NVME_SC_BP_WRITE_PROHIBITED] = "Boot Partition Write Prohibited: The command tried to modify a locked Boot Partition",
+ [NVME_SC_INVALID_CTRL_ID] = "Invalid Controller Identifier: An invalid controller id was specified",
+ [NVME_SC_INVALID_SEC_CTRL_STATE] = "Invalid Secondary Controller State: The requested secondary controller action is invalid based on the secondary and primary controllers current states",
+ [NVME_SC_INVALID_CTRL_RESOURCES] = "Invalid Number of Controller Resources: The specified number of Flexible Resources is invalid",
+ [NVME_SC_INVALID_RESOURCE_ID] = "Invalid Resource Identifier: At least one of the specified resource identifiers was invalid",
+ [NVME_SC_PMR_SAN_PROHIBITED] = "Sanitize Prohibited While Persistent Memory Region is Enabled",
+ [NVME_SC_ANA_GROUP_ID_INVALID] = "ANA Group Identifier Invalid",
+ [NVME_SC_ANA_ATTACH_FAILED] = "ANA Attach Failed: The command's specified ANA Group Identifier is not supported",
+};
+
+static const char * const nvm_status[] = {
+ [NVME_SC_BAD_ATTRIBUTES] = "Conflicting Attributes: The attributes specified in the command are conflicting",
+ [NVME_SC_INVALID_PI] = "Invalid Protection Information: The command's Protection Information Field settings are invalid for the namespace's Protection Information format",
+ [NVME_SC_READ_ONLY] = "Attempted Write to Read Only Range: The LBA range specified contains read-only blocks",
+};
+
+static const char * const nvmf_status[] = {
+ [NVME_SC_CONNECT_FORMAT] = "Incompatible Format: The NVM subsystem does not support the record format specified by the host",
+ [NVME_SC_CONNECT_CTRL_BUSY] = "Controller Busy: The controller is already associated with a host",
+ [NVME_SC_CONNECT_INVALID_PARAM] = "Connect Invalid Parameters: One or more of the command parameters",
+ [NVME_SC_CONNECT_RESTART_DISC] = "Connect Restart Discovery: The NVM subsystem requested is not available",
+ [NVME_SC_CONNECT_INVALID_HOST] = "Connect Invalid Host: The host is not allowed to establish an association to either any controller in the NVM subsystem or the specified controller",
+ [NVME_SC_DISCONNECT_INVALID_QTYPE] = "Invalid Queue Type: The command was sent on the wrong queue type",
+ [NVME_SC_DISCOVERY_RESTART] = "Discover Restart: The snapshot of the records is now invalid or out of date",
+ [NVME_SC_AUTH_REQUIRED] = "Authentication Required: NVMe in-band authentication is required and the queue has not yet been authenticated",
+};
+
+static const char * const media_status[] = {
+ [NVME_SC_WRITE_FAULT] = "Write Fault: The write data could not be committed to the media",
+ [NVME_SC_READ_ERROR] = "Unrecovered Read Error: The read data could not be recovered from the media",
+ [NVME_SC_GUARD_CHECK] = "End-to-end Guard Check Error: The command was aborted due to an end-to-end guard check failure",
+ [NVME_SC_APPTAG_CHECK] = "End-to-end Application Tag Check Error: The command was aborted due to an end-to-end application tag check failure",
+ [NVME_SC_REFTAG_CHECK] = "End-to-end Reference Tag Check Error: The command was aborted due to an end-to-end reference tag check failure",
+ [NVME_SC_COMPARE_FAILED] = "Compare Failure: The command failed due to a miscompare during a Compare command",
+ [NVME_SC_ACCESS_DENIED] = "Access Denied: Access to the namespace and/or LBA range is denied due to lack of access rights",
+ [NVME_SC_UNWRITTEN_BLOCK] = "Deallocated or Unwritten Logical Block: The command failed due to an attempt to read from or verify an LBA range containing a deallocated or unwritten logical block",
+};
+
+static const char * const path_status[] = {
+ [NVME_SC_ANA_INTERNAL_PATH_ERROR] = "Internal Path Error: An internal error specific to the controller processing the commmand prevented completion",
+ [NVME_SC_ANA_PERSISTENT_LOSS] = "Asymmetric Access Persistent Loss: The controller is in a persistent loss state with the requested namespace",
+ [NVME_SC_ANA_INACCESSIBLE] = "Asymmetric Access Inaccessible: The controller is in an inaccessible state with the requested namespace",
+ [NVME_SC_ANA_TRANSITION] = "Asymmetric Access Transition: The controller is currently transitioning states with the requested namespace",
+ [NVME_SC_CTRL_PATH_ERROR] = "Controller Pathing Error: A pathing error was detected by the controller",
+ [NVME_SC_HOST_PATH_ERROR] = "Host Pathing Error: A pathing error was detected by the host",
+ [NVME_SC_CMD_ABORTED_BY_HOST] = "Command Aborted By Host: The command was aborted as a result of host action",
+};
+
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+#define ARGSTR(s, i) arg_str(s, ARRAY_SIZE(s), i)
+
+static const char *arg_str(const char * const *strings,
+ size_t array_size, size_t idx)
+{
+ if (idx < array_size && strings[idx])
+ return strings[idx];
+ return "unrecognized";
+}
+
+const char *nvme_status_to_string(int status, bool fabrics)
+{
+ const char *s = "Unknown status";
+ __u16 sc, sct;
+
+ if (status < 0)
+ return strerror(errno);
+
+ sc = nvme_status_code(status);
+ sct = nvme_status_code_type(status);
+
+ switch (sct) {
+ case NVME_SCT_GENERIC:
+ s = ARGSTR(generic_status, sc);
+ break;
+ case NVME_SCT_CMD_SPECIFIC:
+ if (sc < ARRAY_SIZE(cmd_spec_status))
+ s = ARGSTR(cmd_spec_status, sc);
+ else if (fabrics)
+ s = ARGSTR(nvmf_status, sc);
+ else
+ s = ARGSTR(nvm_status, sc);
+ break;
+ case NVME_SCT_MEDIA:
+ s = ARGSTR(media_status, sc);
+ break;
+ case NVME_SCT_PATH:
+ s = ARGSTR(path_status, sc);
+ break;
+ case NVME_SCT_VS:
+ s = "Vendor Specific Status";
+ break;
+ default:
+ break;
+ }
+
+ return s;
+}
+
static int __nvme_open(const char *name)
{
char *path;
projects / users / sagi / libnvme.git / commitdiff