usb: phy: isp1301: Add OF device ID table

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index db68156568e6e7bc209eaf942eaa9c51bd4e15ad..b3b33cf7ddf608f24b0bca12f1c241261837f791 100644 (file)
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -33,6 +33,12 @@ static const struct i2c_device_id isp1301_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, isp1301_id);
 
+static const struct of_device_id isp1301_of_match[] = {
+       {.compatible = "nxp,isp1301" },
+       { },
+};
+MODULE_DEVICE_TABLE(of, isp1301_of_match);
+
 static struct i2c_client *isp1301_i2c_client;
 
 static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
@@ -130,6 +136,7 @@ static int isp1301_remove(struct i2c_client *client)
 static struct i2c_driver isp1301_driver = {
        .driver = {
                .name = DRV_NAME,
+               .of_match_table = of_match_ptr(isp1301_of_match),
        },
        .probe = isp1301_probe,
        .remove = isp1301_remove,