]> www.infradead.org Git - users/hch/misc.git/commitdiff
net: phy: phy_caps: Allow looking-up link caps based on speed and duplex
authorMaxime Chevallier <maxime.chevallier@bootlin.com>
Fri, 7 Mar 2025 17:36:04 +0000 (18:36 +0100)
committerPaolo Abeni <pabeni@redhat.com>
Tue, 18 Mar 2025 08:03:11 +0000 (09:03 +0100)
As the link_caps array is efficient for <speed,duplex> lookups,
implement a function for speed/duplex lookups that matches a given
mask. This replicates to some extent the phy_lookup_settings()
behaviour, matching full link_capabilities instead of a single linkmode.

phy.c's phy_santize_settings() and phylink's
phylink_ethtool_ksettings_set() performs such lookup using the
phy_settings table, but are only interested in the actual speed/duplex
that were matched, rathet than the individual linkmode.

Similar to phy_lookup_settings(), the newly introduced phy_caps_lookup()
will run through the link_caps[] array by descending speed/duplex order.

If the link_capabilities for a given <speed/duplex> tuple intersects the
passed linkmodes, we consider that a match.

Similar to phy_lookup_settings(), we also allow passing an 'exact'
boolean, allowing non-exact match. Here, we MUST always match the
linkmodes mask, but we allow matching on lower speed settings.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-8-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
drivers/net/phy/phy-caps.h
drivers/net/phy/phy.c
drivers/net/phy/phy_caps.c
drivers/net/phy/phylink.c

index 8833798f141f33a12343231999d0e6edc5294ad0..aef4b54a8429d24119819dc7758dcb3f1bc88bdf 100644 (file)
@@ -51,4 +51,8 @@ phy_caps_lookup_by_linkmode(const unsigned long *linkmodes);
 const struct link_capabilities *
 phy_caps_lookup_by_linkmode_rev(const unsigned long *linkmodes, bool fdx_only);
 
+const struct link_capabilities *
+phy_caps_lookup(int speed, unsigned int duplex, const unsigned long *supported,
+               bool exact);
+
 #endif /* __PHY_CAPS_H */
index 8df37d221fba650f651a5cbd75d60d2c843f5efd..562acde8922494c92f5ac07f76a6b6c5d68d9586 100644 (file)
@@ -213,25 +213,6 @@ int phy_aneg_done(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_aneg_done);
 
-/**
- * phy_find_valid - find a PHY setting that matches the requested parameters
- * @speed: desired speed
- * @duplex: desired duplex
- * @supported: mask of supported link modes
- *
- * Locate a supported phy setting that is, in priority order:
- * - an exact match for the specified speed and duplex mode
- * - a match for the specified speed, or slower speed
- * - the slowest supported speed
- * Returns the matched phy_setting entry, or %NULL if no supported phy
- * settings were found.
- */
-static const struct phy_setting *
-phy_find_valid(int speed, int duplex, unsigned long *supported)
-{
-       return phy_lookup_setting(speed, duplex, supported, false);
-}
-
 /**
  * phy_supported_speeds - return all speeds currently supported by a phy device
  * @phy: The phy device to return supported speeds of.
@@ -274,13 +255,14 @@ EXPORT_SYMBOL(phy_check_valid);
  */
 static void phy_sanitize_settings(struct phy_device *phydev)
 {
-       const struct phy_setting *setting;
+       const struct link_capabilities *c;
+
+       c = phy_caps_lookup(phydev->speed, phydev->duplex, phydev->supported,
+                           false);
 
-       setting = phy_find_valid(phydev->speed, phydev->duplex,
-                                phydev->supported);
-       if (setting) {
-               phydev->speed = setting->speed;
-               phydev->duplex = setting->duplex;
+       if (c) {
+               phydev->speed = c->speed;
+               phydev->duplex = c->duplex;
        } else {
                /* We failed to find anything (no supported speeds?) */
                phydev->speed = SPEED_UNKNOWN;
index c39f38c12ef2a15e2d0e99b881def61389268c11..0366feee2912a4307b2eb89ecefb6b027c44574b 100644 (file)
@@ -170,6 +170,53 @@ phy_caps_lookup_by_linkmode_rev(const unsigned long *linkmodes, bool fdx_only)
        return NULL;
 }
 
+/**
+ * phy_caps_lookup() - Lookup capabilities by speed/duplex that matches a mask
+ * @speed: Speed to match
+ * @duplex: Duplex to match
+ * @supported: Mask of linkmodes to match
+ * @exact: Perform an exact match or not.
+ *
+ * Lookup a link_capabilities entry that intersect the supported linkmodes mask,
+ * and that matches the passed speed and duplex.
+ *
+ * When @exact is set, an exact match is performed on speed and duplex, meaning
+ * that if the linkmodes for the given speed and duplex intersect the supported
+ * mask, this capability is returned, otherwise we don't have a match and return
+ * NULL.
+ *
+ * When @exact is not set, we return either an exact match, or matching capabilities
+ * at lower speed, or the lowest matching speed, or NULL.
+ *
+ * Returns: a matched link_capabilities according to the above process, NULL
+ *         otherwise.
+ */
+const struct link_capabilities *
+phy_caps_lookup(int speed, unsigned int duplex, const unsigned long *supported,
+               bool exact)
+{
+       const struct link_capabilities *lcap, *last = NULL;
+
+       for_each_link_caps_desc_speed(lcap) {
+               if (linkmode_intersects(lcap->linkmodes, supported)) {
+                       last = lcap;
+                       /* exact match on speed and duplex*/
+                       if (lcap->speed == speed && lcap->duplex == duplex) {
+                               return lcap;
+                       } else if (!exact) {
+                               if (lcap->speed <= speed)
+                                       return lcap;
+                       }
+               }
+       }
+
+       if (!exact)
+               return last;
+
+       return NULL;
+}
+EXPORT_SYMBOL_GPL(phy_caps_lookup);
+
 /**
  * phy_caps_linkmode_max_speed() - Clamp a linkmodes set to a max speed
  * @max_speed: Speed limit for the linkmode set
index 76b1a329607bb34eb23f492b2722e0b9aca44f81..ad611dda193359e53d0f2b8ce066a13430f25209 100644 (file)
@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/workqueue.h>
 
+#include "phy-caps.h"
 #include "sfp.h"
 #include "swphy.h"
 
@@ -2852,8 +2853,8 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
                                  const struct ethtool_link_ksettings *kset)
 {
        __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
+       const struct link_capabilities *c;
        struct phylink_link_state config;
-       const struct phy_setting *s;
 
        ASSERT_RTNL();
 
@@ -2896,23 +2897,23 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
                /* Autonegotiation disabled, select a suitable speed and
                 * duplex.
                 */
-               s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
-                                      pl->supported, false);
-               if (!s)
+               c = phy_caps_lookup(kset->base.speed, kset->base.duplex,
+                                   pl->supported, false);
+               if (!c)
                        return -EINVAL;
 
                /* If we have a fixed link, refuse to change link parameters.
                 * If the link parameters match, accept them but do nothing.
                 */
                if (pl->req_link_an_mode == MLO_AN_FIXED) {
-                       if (s->speed != pl->link_config.speed ||
-                           s->duplex != pl->link_config.duplex)
+                       if (c->speed != pl->link_config.speed ||
+                           c->duplex != pl->link_config.duplex)
                                return -EINVAL;
                        return 0;
                }
 
-               config.speed = s->speed;
-               config.duplex = s->duplex;
+               config.speed = c->speed;
+               config.duplex = c->duplex;
                break;
 
        case AUTONEG_ENABLE: