arm64: dts: add LX2160AQDS board support

The LX2160A QorIQ Development System (QDS) is a test, evaluation, and
development platform, supporting QorIQ LX2160A processor.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 445b72bd5a366f1865d6f4cf9f2e631619a64a0f..46b1479b7a6b3bcf91c7f198ac2bc309f0c1d6f4 100644 (file)
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -13,4 +13,5 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
new file mode 100644 (file)
index 0000000..99a22ab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160AQDS
+//
+// Copyright 2018 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+       model = "NXP Layerscape LX2160AQDS";
+       compatible = "fsl,lx2160a-qds", "fsl,lx2160a";
+
+       aliases {
+               crypto = &crypto;
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       sb_3v3: regulator-sb3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "MC34717-3.3VSB";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+};
+
+&crypto {
+       status = "okay";
+};
+
+&esdhc0 {
+       status = "okay";
+};
+
+&esdhc1 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+
+       i2c-mux@77 {
+               compatible = "nxp,pca9547";
+               reg = <0x77>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x2>;
+
+                       power-monitor@40 {
+                               compatible = "ti,ina220";
+                               reg = <0x40>;
+                               shunt-resistor = <500>;
+                       };
+
+                       power-monitor@41 {
+                               compatible = "ti,ina220";
+                               reg = <0x41>;
+                               shunt-resistor = <1000>;
+                       };
+               };
+
+               i2c@3 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x3>;
+
+                       temperature-sensor@4c {
+                               compatible = "nxp,sa56004";
+                               reg = <0x4c>;
+                               vcc-supply = <&sb_3v3>;
+                       };
+
+                       temperature-sensor@4d {
+                               compatible = "nxp,sa56004";
+                               reg = <0x4d>;
+                               vcc-supply = <&sb_3v3>;
+                       };
+
+                       rtc@51 {
+                               compatible = "nxp,pcf2129";
+                               reg = <0x51>;
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};