/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
- * Copyright (C) 2012-2014, 2018, 2020-2021 Intel Corporation
+ * Copyright (C) 2012-2014, 2018, 2020-2021, 2024 Intel Corporation
* Copyright (C) 2013-2015 Intel Mobile Communications GmbH
* Copyright (C) 2016-2017 Intel Deutschland GmbH
*/
} __packed; /* UCODE_ALIVE_NTFY_API_S_VER_6 */
/**
- * enum iwl_extended_cfg_flag - commands driver may send before
+ * enum iwl_extended_cfg_flags - commands driver may send before
* finishing init flow
* @IWL_INIT_DEBUG_CFG: driver is going to send debug config command
* @IWL_INIT_NVM: driver is going to send NVM_ACCESS commands
};
/**
- * struct iwl_extended_cfg_cmd - mark what commands ucode should wait for
+ * struct iwl_init_extended_cfg_cmd - mark what commands ucode should wait for
* before finishing init flows
* @init_flags: values from iwl_extended_cfg_flags
*/
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
- * Copyright (C) 2012-2014, 2020, 2022 Intel Corporation
+ * Copyright (C) 2012-2014, 2020, 2022, 2024 Intel Corporation
* Copyright (C) 2013-2015 Intel Mobile Communications GmbH
* Copyright (C) 2016-2017 Intel Deutschland GmbH
*/
} __packed; /* TIME_QUOTA_DATA_API_S_VER_1 */
/**
- * struct iwl_time_quota_cmd - configuration of time quota between bindings
+ * struct iwl_time_quota_cmd_v1 - configuration of time quota between bindings
* ( TIME_QUOTA_CMD = 0x2c )
* @quotas: allocations per binding
* Note: on non-CDB the fourth one is the auxilary mac and is
/* TODO: OFFLOADS_QUERY_API_S_VER_1 */
/**
- * enum iwl_d3_proto_offloads - enabled protocol offloads
+ * enum iwl_proto_offloads - enabled protocol offloads
* @IWL_D3_PROTO_OFFLOAD_ARP: ARP data is enabled
* @IWL_D3_PROTO_OFFLOAD_NS: NS (Neighbor Solicitation) is enabled
* @IWL_D3_PROTO_IPV4_VALID: IPv4 data is valid
#define IWL_WOWLAN_MAX_PATTERNS 20
/**
- * struct iwl_wowlan_patterns_cmd - WoWLAN wakeup patterns
+ * struct iwl_wowlan_patterns_cmd_v1 - WoWLAN wakeup patterns
*/
struct iwl_wowlan_patterns_cmd_v1 {
/**
} __packed; /* FW_TLV_DEBUG_ADDR_VALUE_VER_1 */
/**
- * struct iwl_fw_ini_conf_tlv - configuration TLV to set register/memory.
+ * struct iwl_fw_ini_conf_set_tlv - configuration TLV to set register/memory.
*
* @hdr: debug header
* @time_point: time point to apply config. One of &enum iwl_fw_ini_time_point
#define IWL_LCI_CIVIC_IE_MAX_SIZE 400
/**
- * struct iwl_tof_responder_dyn_config_cmd - Dynamic responder settings
+ * struct iwl_tof_responder_dyn_config_cmd_v2 - Dynamic responder settings
* @lci_len: The length of the 1st (LCI) part in the @lci_civic buffer
* @civic_len: The length of the 2nd (CIVIC) part in the @lci_civic buffer
* @lci_civic: The LCI/CIVIC buffer. LCI data (if exists) comes first, then, if
} __packed; /* MISSED_VAP_NTFY_API_S_VER_1 */
/**
- * struct iwl_channel_switch_start_notif - Channel switch start notification
+ * struct iwl_channel_switch_start_notif_v1 - Channel switch start notification
*
* @id_and_color: ID and color of the MAC
*/
} __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */
/**
- * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD
+ * struct iwl_nvm_access_resp - response to NVM_ACCESS_CMD
* @offset: offset in bytes into the section
* @length: in bytes, either how much was written or read
* @type: NVM_SECTION_TYPE_*
#define IWL_NUM_CHANNELS 110
/**
- * struct iwl_nvm_get_info_regulatory - regulatory information
+ * struct iwl_nvm_get_info_regulatory_v1 - regulatory information
* @lar_enabled: is LAR enabled
* @channel_profile: regulatory data of this channel
* @reserved: reserved
} __packed;
/**
- * struct iwl_stored_beacon_notif - Stored beacon notification
+ * struct iwl_stored_beacon_notif_v2 - Stored beacon notification
*
* @common: fields common for all versions
* @data: beacon data, length in @byte_count
} __packed; /* CT_KILL_NOTIFICATION_API_S_VER_1, CT_KILL_NOTIFICATION_API_S_VER_2 */
/**
-* enum ctdp_cmd_operation - CTDP command operations
+* enum iwl_mvm_ctdp_cmd_operation - CTDP command operations
* @CTDP_CMD_OPERATION_START: update the current budget
* @CTDP_CMD_OPERATION_STOP: stop ctdp
* @CTDP_CMD_OPERATION_REPORT: get the average budget
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
- * Copyright (C) 2012-2014, 2018-2022 Intel Corporation
+ * Copyright (C) 2012-2014, 2018-2022, 2024 Intel Corporation
* Copyright (C) 2017 Intel Deutschland GmbH
*/
#ifndef __iwl_fw_api_rs_h__
#include "mac.h"
/**
- * enum iwl_tlc_mng_cfg_flags_enum - options for TLC config flags
+ * enum iwl_tlc_mng_cfg_flags - options for TLC config flags
* @IWL_TLC_MNG_CFG_FLAGS_STBC_MSK: enable STBC. For HE this enables STBC for
* bandwidths <= 80MHz
* @IWL_TLC_MNG_CFG_FLAGS_LDPC_MSK: enable LDPC
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
- * Copyright (C) 2012-2014, 2018-2023 Intel Corporation
+ * Copyright (C) 2012-2014, 2018-2024 Intel Corporation
* Copyright (C) 2013-2015 Intel Mobile Communications GmbH
* Copyright (C) 2015-2017 Intel Deutschland GmbH
*/
} __packed; /* BA_WINDOW_STATUS_NTFY_API_S_VER_1 */
/**
- * struct iwl_rfh_queue_config - RX queue configuration
+ * struct iwl_rfh_queue_data - RX queue configuration
* @q_num: Q num
* @enable: enable queue
* @reserved: alignment
} __packed;
/**
- * struct iwl_scan_offload_profile_cfg
+ * struct iwl_scan_offload_profile_cfg_v1 - scan offload profile config
* @profiles: profiles to search for match
* @data: the rest of the data for profile_cfg
*/
} __packed;
/**
- * struct iwl_scan_req_umac_tail - the rest of the UMAC scan request command
+ * struct iwl_scan_req_umac_tail_v2 - the rest of the UMAC scan request command
* parameters following channels configuration array.
* @schedule: two scheduling plans.
* @delay: delay in TUs before starting the first scan iteration
} __packed; /* SCAN_REQUEST_PARAMS_API_S_VER_12 */
/**
- * struct iwl_scan_req_params_v16
+ * struct iwl_scan_req_params_v17 - scan request parameters (v17)
* @general_params: &struct iwl_scan_general_params_v11
* @channel_params: &struct iwl_scan_channel_params_v7
* @periodic_params: &struct iwl_scan_periodic_parms_v1
} __packed; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_12 */
/**
- * struct iwl_scan_req_umac_v16
+ * struct iwl_scan_req_umac_v17 - scan request command (v17)
* @uid: scan id, &enum iwl_umac_scan_uid_offsets
* @ooc_priority: out of channel priority - &enum iwl_scan_priority
* @scan_params: scan parameters
};
/**
- * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
+ * struct iwl_tx_path_flush_cmd_v1 -- queue/FIFO flush command
* @queues_ctl: bitmap of queues to flush
* @flush_ctl: control flags
* @reserved: reserved
#define IWL_INI_DUMP_NAME_TYPE (BIT(31) | BIT(24))
/**
- * struct iwl_fw_error_dump_data - data for one type
+ * struct iwl_fw_ini_error_dump_data - data for one type
* @type: &enum iwl_fw_ini_region_type
* @sub_type: sub type id
* @sub_type_ver: sub type version
} __packed;
/**
- * struct iwl_fw_error_dump_file - header of dump file
+ * struct iwl_fw_ini_dump_file_hdr - header of dump file
* @barker: must be %IWL_FW_INI_ERROR_DUMP_BARKER
* @file_len: the length of all the file including the header
*/
};
/**
- * struct iwl_cfg_trans - information needed to start the trans
+ * struct iwl_cfg_trans_params - information needed to start the trans
*
* These values are specific to the device ID and do not change when
* multiple configs are used for a single device ID. They values are
* @mq_rx_supported: multi-queue rx support
* @integrated: discrete or integrated
* @low_latency_xtal: use the low latency xtal if supported
+ * @bisr_workaround: BISR hardware workaround (for 22260 series devices)
* @ltr_delay: LTR delay parameter, &enum iwl_cfg_trans_ltr_delay.
* @imr_enabled: use the IMR if supported.
*/
u8 tx_chains, u8 rx_chains);
/**
- * iwl_parse_mcc_info - parse MCC (mobile country code) info coming from FW
+ * iwl_parse_nvm_mcc_info - parse MCC (mobile country code) info coming from FW
*
* This function parses the regulatory channel data received as a
* MCC_UPDATE_CMD command. It returns a newly allocation regulatory domain,
};
/**
- * struct iwl_mvm_tt_mgnt - Thermal Throttling Management structure
+ * struct iwl_mvm_tt_mgmt - Thermal Throttling Management structure
* @ct_kill_exit: worker to exit thermal kill
* @dynamic_smps: Is thermal throttling enabled dynamic_smps?
* @tx_backoff: The current thremal throttling tx backoff in uSec.
*
* Copyright(c) 2015 Intel Mobile Communications GmbH
* Copyright(c) 2017 Intel Deutschland GmbH
- * Copyright (C) 2003 - 2014, 2018 - 2023 Intel Corporation
+ * Copyright (C) 2003 - 2014, 2018 - 2024 Intel Corporation
*****************************************************************************/
#ifndef __rs_h__
int tid, struct ieee80211_tx_info *info, bool ndp);
/**
- * iwl_rate_control_register - Register the rate control algorithm callbacks
+ * iwl_mvm_rate_control_register - Register the rate control algorithm callbacks
*
* Since the rate control algorithm is hardware specific, there is no need
* or reason to place it as a stand alone module. The driver can call
int iwl_mvm_rate_control_register(void);
/**
- * iwl_rate_control_unregister - Unregister the rate control callbacks
+ * iwl_mvm_rate_control_unregister - Unregister the rate control callbacks
*
* This should be called after calling ieee80211_unregister_hw, but before
* the driver is unloaded.
};
/**
- * Send the STA info to the FW.
+ * iwl_mvm_sta_send_to_fw - Send the STA info to the FW.
*
* @mvm: the iwl_mvm* to use
* @sta: the STA
projects / users / willy / pagecache.git / commitdiff