load_nandsim.sh: simplify the code

First find out what the kernel module parameters should be, then load it
once, instead of doing it in each 'case' section.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

diff --git a/load_nandsim.sh b/load_nandsim.sh
index 4c3bb06f3bb74873d0c8a087d882f8311b8142da..1bb31e1ce521cbce5b4d53b4d8abcf85d1cbaaac 100755 (executable)
--- a/load_nandsim.sh
+++ b/load_nandsim.sh
@@ -80,39 +80,51 @@ if [ "$page_size" -eq 512 ] && [ "$eb_size" -ne "16" ]; then
        fatal "only 16KiB eraseblocks are possible in case of 512 bytes page"
 fi
 
+first=
+second=
+third=
+fourth=
+
 if [ "$page_size" -eq "512" ]; then
+       first="0x20"
        case "$size" in
-       16)  modprobe nandsim first_id_byte=0x20 second_id_byte=0x33 ;;
-       32)  modprobe nandsim first_id_byte=0x20 second_id_byte=0x35 ;;
-       64)  modprobe nandsim first_id_byte=0x20 second_id_byte=0x36 ;;
-       128) modprobe nandsim first_id_byte=0x20 second_id_byte=0x78 ;;
-       256) modprobe nandsim first_id_byte=0x20 second_id_byte=0x71 ;;
+       16)  second=0x33 ;;
+       32)  second=0x35 ;;
+       64)  second=0x36 ;;
+       128) second=0x78 ;;
+       256) second=0x71 ;;
        *) fatal "flash size ${size}MiB is not supported, try 16, 32, 64 or 256"
        esac
 elif [ "$page_size" -eq "2048" ]; then
        case "$eb_size" in
-       64)  fourh_bite="0x05" ;;
-       128) fourh_bite="0x15" ;;
-       256) fourh_bite="0x25" ;;
-       512) fourh_bite="0x35" ;;
+       64)  fourth="0x05" ;;
+       128) fourth="0x15" ;;
+       256) fourth="0x25" ;;
+       512) fourth="0x35" ;;
        *)   fatal "eraseblock ${eb_size}KiB is not supported"
        esac
 
+
        case "$size" in
-       64)   modprobe nandsim first_id_byte=0x20 second_id_byte=0xa2 third_id_byte=0x00 fourth_id_byte="$fourh_bite" ;;
-       128)  modprobe nandsim first_id_byte=0xec second_id_byte=0xa1 third_id_byte=0x00 fourth_id_byte="$fourh_bite" ;;
-       256)  modprobe nandsim first_id_byte=0x20 second_id_byte=0xaa third_id_byte=0x00 fourth_id_byte="$fourh_bite" ;;
-       512)  modprobe nandsim first_id_byte=0x20 second_id_byte=0xac third_id_byte=0x00 fourth_id_byte="$fourh_bite" ;;
-       1024) modprobe nandsim first_id_byte=0xec second_id_byte=0xd3 third_id_byte=0x51 fourth_id_byte="$fourh_bite" ;;
+       64)   first="0x20"; second="0xa2"; third="0x00 ";;
+       128)  first="0xec"; second="0xa1"; third="0x00 ";;
+       256)  first="0x20"; second="0xaa"; third="0x00 ";;
+       512)  first="0x20"; second="0xac"; third="0x00 ";;
+       1024) first="0xec"; second="0xd3"; third="0x51 ";;
        *) fatal "unable to emulate ${size}MiB flash with ${eb_size}KiB eraseblock"
        esac
 else
        fatal "bad NAND page size ${page_size}KiB, it has to be either 512 or 2048"
 fi
 
+first="first_id_byte=$first"
+second="second_id_byte=$second"
+[ -z "$third" ]  || third="third_id_byte=$third"
+[ -z "$fourth" ] || fourth="fourth_id_byte=$fourth"
+
+modprobe nandsim "$first" "$second" $third $fourth
 if [ "$?" != "0" ]; then
        fatal "Error: cannot load nandsim"
 fi
 
 echo "Loaded NAND simulator (${size}MiB, ${eb_size}KiB eraseblock, $page_size bytes NAND page)"
-exit 0