ixgbe: Use out-of-line function for register reads

Register reads are slow, so don't inline them.

Size before:
   text	   data	    bss	    dec	    hex	filename
 226337	   8280	    552	 235169	  396a1	ixgbe.ko

Size after:
   text	   data	    bss	    dec	    hex	filename
 194578	   8280	    552	 203410	  31a92	ixgbe.ko

for about a 14% reduction in text size.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index f12c40fb5537a18604ff030f4adc4287946dbff4..d15ff2e5edb76b3dcb80a102666b2e2fa1dc6531 100644 (file)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -141,8 +141,6 @@ static inline bool ixgbe_removed(void __iomem *addr)
        return unlikely(!addr);
 }
 
-void ixgbe_check_remove(struct ixgbe_hw *hw, u32 reg);
-
 static inline void ixgbe_write_reg(struct ixgbe_hw *hw, u32 reg, u32 value)
 {
        u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
@@ -172,18 +170,7 @@ static inline void ixgbe_write_reg64(struct ixgbe_hw *hw, u32 reg, u64 value)
 }
 #define IXGBE_WRITE_REG64(a, reg, value) ixgbe_write_reg64((a), (reg), (value))
 
-static inline u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg)
-{
-       u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
-       u32 value;
-
-       if (ixgbe_removed(reg_addr))
-               return IXGBE_FAILED_READ_REG;
-       value = readl(reg_addr + reg);
-       if (unlikely(value == IXGBE_FAILED_READ_REG))
-               ixgbe_check_remove(hw, reg);
-       return value;
-}
+u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg);
 #define IXGBE_READ_REG(a, reg) ixgbe_read_reg((a), (reg))
 
 #define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) \

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 147efec3e0029bbb12b085915e0c905d093e7729..7a67a9fac2a34963f6c5223210ed0c602a5a8505 100644 (file)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -301,7 +301,7 @@ static void ixgbe_remove_adapter(struct ixgbe_hw *hw)
                ixgbe_service_event_schedule(adapter);
 }
 
-void ixgbe_check_remove(struct ixgbe_hw *hw, u32 reg)
+static void ixgbe_check_remove(struct ixgbe_hw *hw, u32 reg)
 {
        u32 value;
 
@@ -320,6 +320,32 @@ void ixgbe_check_remove(struct ixgbe_hw *hw, u32 reg)
                ixgbe_remove_adapter(hw);
 }
 
+/**
+ * ixgbe_read_reg - Read from device register
+ * @hw: hw specific details
+ * @reg: offset of register to read
+ *
+ * Returns : value read or IXGBE_FAILED_READ_REG if removed
+ *
+ * This function is used to read device registers. It checks for device
+ * removal by confirming any read that returns all ones by checking the
+ * status register value for all ones. This function avoids reading from
+ * the hardware if a removal was previously detected in which case it
+ * returns IXGBE_FAILED_READ_REG (all ones).
+ */
+u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg)
+{
+       u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
+       u32 value;
+
+       if (ixgbe_removed(reg_addr))
+               return IXGBE_FAILED_READ_REG;
+       value = readl(reg_addr + reg);
+       if (unlikely(value == IXGBE_FAILED_READ_REG))
+               ixgbe_check_remove(hw, reg);
+       return value;
+}
+
 static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev)
 {
        u16 value;