ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board

MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.

Genaral features:
- Ethernet 10/100
- USB Type A
- Audio Out
- microSD
- LVDS panel connector
- Wifi/BT (option)
- UMTS LTE with sim connector (option)

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.

Add support for it.

Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Francesco Utel <francesco.utel@engicam.com>
Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8e5d4ab4e75e6e027309e6dd6583d7ea5ac25b86..cf38da2b02dd205e87e61fb5097c01689e5283bc 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1076,6 +1076,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
        stm32mp157a-dhcor-avenger96.dtb \
        stm32mp157a-dk1.dtb \
        stm32mp157a-iot-box.dtb \
+       stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
        stm32mp157a-stinger96.dtb \
        stm32mp157c-dhcom-pdk2.dtb \
        stm32mp157c-dhcom-picoitx.dtb \

diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
new file mode 100644 (file)
index 0000000..7a75868
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-microgea-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 Carrier Board";
+       compatible = "engicam,microgea-stm32mp1-microdev2.0",
+                    "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+       aliases {
+               serial0 = &uart4;
+               serial1 = &uart8;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&sdmmc1 {
+       bus-width = <4>;
+       disable-wp;
+       pinctrl-names = "default", "opendrain", "sleep";
+       pinctrl-0 = <&sdmmc1_b4_pins_a>;
+       pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+       pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+       st,neg-edge;
+       vmmc-supply = <&vdd>;
+       status = "okay";
+};
+
+&uart4 {
+       pinctrl-names = "default", "sleep", "idle";
+       pinctrl-0 = <&uart4_pins_a>;
+       pinctrl-1 = <&uart4_sleep_pins_a>;
+       pinctrl-2 = <&uart4_idle_pins_a>;
+       status = "okay";
+};
+
+/* J31: RS323 */
+&uart8 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart8_pins_a>;
+       status = "okay";
+};