net: davinci_mdio: reuse for keystone2 arch

The similar MDIO HW blocks is used by keystone 2 SoCs as
in Davinci SoCs:
- one in Gigabit Ethernet (GbE) Switch Subsystem
  See http://www.ti.com/lit/ug/sprugv9d/sprugv9d.pdf
- one in 10 Gigabit Ethernet Subsystem
  See http://www.ti.com/lit/ug/spruhj5/spruhj5.pdf

Hence, reuse Davinci MDIO driver for Keystone 2 and
enable TI networking for Keystone 2 devices

Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt
index 72efaaf764f728479841b9941ee4e23c0ec52487..0369e25aabd2dd8cbc6be196130d845394b050ac 100644 (file)
--- a/Documentation/devicetree/bindings/net/davinci-mdio.txt
+++ b/Documentation/devicetree/bindings/net/davinci-mdio.txt
@@ -1,8 +1,8 @@
-TI SoC Davinci MDIO Controller Device Tree Bindings
+TI SoC Davinci/Keystone2 MDIO Controller Device Tree Bindings
 ---------------------------------------------------
 
 Required properties:
-- compatible           : Should be "ti,davinci_mdio"
+- compatible           : Should be "ti,davinci_mdio" or "ti,keystone_mdio"
 - reg                  : physical base address and size of the davinci mdio
                          registers map
 - bus_freq             : Mdio Bus frequency
@@ -19,7 +19,7 @@ file.
 Examples:
 
        mdio: davinci_mdio@4A101000 {
-               compatible = "ti,cpsw";
+               compatible = "ti,davinci_mdio";
                reg = <0x4A101000 0x1000>;
                bus_freq = <1000000>;
        };
@@ -27,7 +27,7 @@ Examples:
 (or)
 
        mdio: davinci_mdio@4A101000 {
-               compatible = "ti,cpsw";
+               compatible = "ti,davinci_mdio";
                ti,hwmods = "davinci_mdio";
                bus_freq = <1000000>;
        };

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 53150c25a96bd455f58dc30ca3c592b6a598461e..1769700a6070bb238c9895d38c2d379d67375504 100644 (file)
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -5,7 +5,7 @@
 config NET_VENDOR_TI
        bool "Texas Instruments (TI) devices"
        default y
-       depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX))
+       depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE))
        ---help---
          If you have a network (Ethernet) card belonging to this class, say Y
          and read the Ethernet-HOWTO, available from
@@ -32,7 +32,7 @@ config TI_DAVINCI_EMAC
 
 config TI_DAVINCI_MDIO
        tristate "TI DaVinci MDIO Support"
-       depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX )
+       depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE )
        select PHYLIB
        ---help---
          This driver supports TI's DaVinci MDIO module.