Pull mtd update from David Woodhouse:
- More robust parsing especially of xattr data in JFFS2
- Updates to mxc_nand and gpmi drivers to support new boards and device tree
- Improve consistency of information about ECC strength in NAND devices
- Clean up partition handling of plat_nand
- Support NAND drivers without dedicated access to OOB area
- BCH hardware ECC support for OMAP
- Other fixes and cleanups, and a few new device IDs
Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.
* tag 'for-linus-3.5-
20120601' of git://git.infradead.org/linux-mtd: (75 commits)
mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
mtd: block2mtd: fix recursive call of mtd_writev
mtd: gpmi-nand: define ecc.strength
mtd: of_parts: fix breakage in Kconfig
mtd: nand: fix scan_read_raw_oob
mtd: docg3 fix in-middle of blocks reads
mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
mtd: add fixup for S29NS512P NOR flash.
jffs2: allow to complete xattr integrity check on first GC scan
jffs2: allow to discriminate between recoverable and non-recoverable errors
mtd: nand: omap: add support for hardware BCH ecc
ARM: OMAP3: gpmc: add BCH ecc api and modes
mtd: nand: check the return code of 'read_oob/read_oob_raw'
mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
mtd: m25p80: Add support for Winbond W25Q80BW
jffs2: get rid of jffs2_sync_super
jffs2: remove unnecessary GC pass on sync
jffs2: remove unnecessary GC pass on umount
jffs2: remove lock_super
mtd: gpmi: add gpmi support for mx6q
...
.nr_chips = 1,
.chip_offset = 0,
.options = NAND_SAMSUNG_LP_OPTIONS,
- .part_probe_types = part_probes,
},
.ctrl = {
- .cmd_ctrl = nand_cmd_ctl,
+ .cmd_ctrl = omap1_nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
};
.nr_partitions = ARRAY_SIZE(h2_nand_partitions),
.partitions = h2_nand_partitions,
.options = NAND_SAMSUNG_LP_OPTIONS,
- .part_probe_types = h2_part_probes,
},
.ctrl = {
- .cmd_ctrl = h2_nand_cmd_ctl,
+ .cmd_ctrl = omap1_nand_cmd_ctl,
.dev_ready = h2_nand_dev_ready,
-
},
};
.nr_partitions = ARRAY_SIZE(nand_partitions),
.partitions = nand_partitions,
.options = NAND_SAMSUNG_LP_OPTIONS,
- .part_probe_types = part_probes,
},
.ctrl = {
- .cmd_ctrl = nand_cmd_ctl,
+ .cmd_ctrl = omap1_nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
.nr_chips = 1,
.chip_offset = 0,
.options = NAND_SAMSUNG_LP_OPTIONS,
- .part_probe_types = part_probes,
},
.ctrl = {
- .cmd_ctrl = nand_cmd_ctl,
+ .cmd_ctrl = omap1_nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
};
#define GPMC_ECC_CONTROL 0x1f8
#define GPMC_ECC_SIZE_CONFIG 0x1fc
#define GPMC_ECC1_RESULT 0x200
+ #define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
+/* GPMC ECC control settings */
+#define GPMC_ECC_CTRL_ECCCLEAR 0x100
+#define GPMC_ECC_CTRL_ECCDISABLE 0x000
+#define GPMC_ECC_CTRL_ECCREG1 0x001
+#define GPMC_ECC_CTRL_ECCREG2 0x002
+#define GPMC_ECC_CTRL_ECCREG3 0x003
+#define GPMC_ECC_CTRL_ECCREG4 0x004
+#define GPMC_ECC_CTRL_ECCREG5 0x005
+#define GPMC_ECC_CTRL_ECCREG6 0x006
+#define GPMC_ECC_CTRL_ECCREG7 0x007
+#define GPMC_ECC_CTRL_ECCREG8 0x008
+#define GPMC_ECC_CTRL_ECCREG9 0x009
+
#define GPMC_CS0_OFFSET 0x60
#define GPMC_CS_SIZE 0x30
#include <linux/module.h>
#include <linux/mtd/gpmi-nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/pinctrl/consumer.h>
+ #include <linux/of.h>
+ #include <linux/of_device.h>
#include "gpmi-nand.h"
/* add our owner bbt descriptor */
if (!host->clk_act) {
/* Enable the NFC clock */
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
host->clk_act = 1;
}
+ }
- if (nfc_is_v21()) {
- host->active_cs = chip;
- writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+ static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip)
+ {
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ if (chip == -1) {
+ /* Disable the NFC clock */
+ if (host->clk_act) {
+ clk_disable(host->clk);
+ host->clk_act = 0;
+ }
+ return;
+ }
+
+ if (!host->clk_act) {
+ /* Enable the NFC clock */
+ clk_enable(host->clk);
+ host->clk_act = 1;
}
+
+ host->active_cs = chip;
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
}
/*
projects / linux.git / commitdiff