net/fsl_pq_mdio: Use ioread/iowrite32be() portable accessors

in_be32()/out_be32() are not defined by ARM.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
index 32136f08515e1d681910d122835a9deaed917eeb..a422838b4f1de1b920d6124069addde7ab93c295 100644 (file)
--- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c
+++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
@@ -107,14 +107,14 @@ static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
        u32 status;
 
        /* Set the PHY address and the register address we want to write */
-       out_be32(&regs->miimadd, (mii_id << 8) | regnum);
+       iowrite32be((mii_id << 8) | regnum, &regs->miimadd);
 
        /* Write out the value we want */
-       out_be32(&regs->miimcon, value);
+       iowrite32be(value, &regs->miimcon);
 
        /* Wait for the transaction to finish */
-       status = spin_event_timeout(!(in_be32(&regs->miimind) & MIIMIND_BUSY),
-                                   MII_TIMEOUT, 0);
+       status = spin_event_timeout(!(ioread32be(&regs->miimind) &
+                                   MIIMIND_BUSY), MII_TIMEOUT, 0);
 
        return status ? 0 : -ETIMEDOUT;
 }
@@ -137,21 +137,21 @@ static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
        u16 value;
 
        /* Set the PHY address and the register address we want to read */
-       out_be32(&regs->miimadd, (mii_id << 8) | regnum);
+       iowrite32be((mii_id << 8) | regnum, &regs->miimadd);
 
        /* Clear miimcom, and then initiate a read */
-       out_be32(&regs->miimcom, 0);
-       out_be32(&regs->miimcom, MII_READ_COMMAND);
+       iowrite32be(0, &regs->miimcom);
+       iowrite32be(MII_READ_COMMAND, &regs->miimcom);
 
        /* Wait for the transaction to finish, normally less than 100us */
-       status = spin_event_timeout(!(in_be32(&regs->miimind) &
+       status = spin_event_timeout(!(ioread32be(&regs->miimind) &
                                    (MIIMIND_NOTVALID | MIIMIND_BUSY)),
                                    MII_TIMEOUT, 0);
        if (!status)
                return -ETIMEDOUT;
 
        /* Grab the value of the register from miimstat */
-       value = in_be32(&regs->miimstat);
+       value = ioread32be(&regs->miimstat);
 
        dev_dbg(&bus->dev, "read %04x from address %x/%x\n", value, mii_id, regnum);
        return value;
@@ -167,14 +167,14 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus)
        mutex_lock(&bus->mdio_lock);
 
        /* Reset the management interface */
-       out_be32(&regs->miimcfg, MIIMCFG_RESET);
+       iowrite32be(MIIMCFG_RESET, &regs->miimcfg);
 
        /* Setup the MII Mgmt clock speed */
-       out_be32(&regs->miimcfg, MIIMCFG_INIT_VALUE);
+       iowrite32be(MIIMCFG_INIT_VALUE, &regs->miimcfg);
 
        /* Wait until the bus is free */
-       status = spin_event_timeout(!(in_be32(&regs->miimind) & MIIMIND_BUSY),
-                                   MII_TIMEOUT, 0);
+       status = spin_event_timeout(!(ioread32be(&regs->miimind) &
+                                   MIIMIND_BUSY), MII_TIMEOUT, 0);
 
        mutex_unlock(&bus->mdio_lock);
 
@@ -435,7 +435,7 @@ static int fsl_pq_mdio_probe(struct platform_device *pdev)
 
                        tbipa = data->get_tbipa(priv->map);
 
-                       out_be32(tbipa, be32_to_cpup(prop));
+                       iowrite32be(be32_to_cpup(prop), tbipa);
                }
        }