Staging: rtl8192e: Add spaces around operators.

Add spaces around arithmetic and bitwise operators to improve
readability of the code.

Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Link: https://lore.kernel.org/r/20240830020508.532945-4-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index 83b2e9ee53d8681fdcf7af21413b5119522cb981..4762cb52261abc1a83aacddba54c2f2f055222bd 100644 (file)
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -339,12 +339,12 @@ enum rt_op_mode {
 
 #define        FC_QOS_BIT                                      BIT(7)
 #define is_data_frame(pdu)     (((pdu[0] & 0x0C) == 0x08) ? true : false)
-#define        is_legacy_data_frame(pdu)       (is_data_frame(pdu) && (!(pdu[0]&FC_QOS_BIT)))
+#define        is_legacy_data_frame(pdu)       (is_data_frame(pdu) && (!(pdu[0] & FC_QOS_BIT)))
 #define is_qos_data_frame(pframe)                      \
-       ((*(u16 *)pframe&(IEEE80211_STYPE_QOS_DATA|RTLLIB_FTYPE_DATA)) ==       \
-       (IEEE80211_STYPE_QOS_DATA|RTLLIB_FTYPE_DATA))
-#define frame_order(pframe)     (*(u16 *)pframe&IEEE80211_FCTL_ORDER)
-#define SN_LESS(a, b)          (((a-b)&0x800) != 0)
+       ((*(u16 *)pframe & (IEEE80211_STYPE_QOS_DATA | RTLLIB_FTYPE_DATA)) ==   \
+       (IEEE80211_STYPE_QOS_DATA | RTLLIB_FTYPE_DATA))
+#define frame_order(pframe)     (*(u16 *)pframe & IEEE80211_FCTL_ORDER)
+#define SN_LESS(a, b)          (((a - b) & 0x800) != 0)
 #define SN_EQUAL(a, b) (a == b)
 #define MAX_DEV_ADDR_SIZE 8
 
@@ -414,13 +414,13 @@ enum _REG_PREAMBLE_MODE {
 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & RTLLIB_SCTL_FRAG)
 #define WLAN_GET_SEQ_SEQ(seq)  (((seq) & RTLLIB_SCTL_SEQ) >> 4)
 
-#define RTLLIB_STATMASK_SIGNAL (1<<0)
-#define RTLLIB_STATMASK_RSSI (1<<1)
-#define RTLLIB_STATMASK_NOISE (1<<2)
+#define RTLLIB_STATMASK_SIGNAL (1 << 0)
+#define RTLLIB_STATMASK_RSSI (1 << 1)
+#define RTLLIB_STATMASK_NOISE (1 << 2)
 #define RTLLIB_STATMASK_WEMASK 0x7
 
-#define RTLLIB_CCK_MODULATION    (1<<0)
-#define RTLLIB_OFDM_MODULATION   (1<<1)
+#define RTLLIB_CCK_MODULATION    (1 << 0)
+#define RTLLIB_OFDM_MODULATION   (1 << 1)
 
 #define RTLLIB_CCK_RATE_LEN            4
 #define RTLLIB_CCK_RATE_1MB                    0x02
@@ -507,11 +507,11 @@ struct rtllib_frag_entry {
 
 struct rtllib_device;
 
-#define SEC_ACTIVE_KEY    (1<<4)
-#define SEC_AUTH_MODE     (1<<5)
-#define SEC_UNICAST_GROUP (1<<6)
-#define SEC_LEVEL       (1<<7)
-#define SEC_ENABLED       (1<<8)
+#define SEC_ACTIVE_KEY    (1 << 4)
+#define SEC_AUTH_MODE     (1 << 5)
+#define SEC_UNICAST_GROUP (1 << 6)
+#define SEC_LEVEL       (1 << 7)
+#define SEC_ENABLED       (1 << 8)
 
 #define SEC_LEVEL_0      0 /* None */
 #define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
@@ -696,17 +696,17 @@ union frameqos {
 #define MAX_WPA_IE_LEN 64
 #define MAX_WZC_IE_LEN 256
 
-#define NETWORK_EMPTY_ESSID (1<<0)
-#define NETWORK_HAS_OFDM    (1<<1)
-#define NETWORK_HAS_CCK     (1<<2)
+#define NETWORK_EMPTY_ESSID (1 << 0)
+#define NETWORK_HAS_OFDM    (1 << 1)
+#define NETWORK_HAS_CCK     (1 << 2)
 
 /* QoS structure */
-#define NETWORK_HAS_QOS_PARAMETERS      (1<<3)
-#define NETWORK_HAS_QOS_INFORMATION     (1<<4)
+#define NETWORK_HAS_QOS_PARAMETERS      (1 << 3)
+#define NETWORK_HAS_QOS_INFORMATION     (1 << 4)
 #define NETWORK_HAS_QOS_MASK       (NETWORK_HAS_QOS_PARAMETERS | \
                                         NETWORK_HAS_QOS_INFORMATION)
 /* 802.11h */
-#define NETWORK_HAS_ERP_VALUE     (1<<10)
+#define NETWORK_HAS_ERP_VALUE     (1 << 10)
 
 #define QOS_QUEUE_NUM             4
 #define QOS_OUI_LEN                 3
@@ -996,8 +996,8 @@ enum rtl_link_state {
 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
 #define DEFAULT_FTS 2346
 
-#define CFG_RTLLIB_RESERVE_FCS (1<<0)
-#define CFG_RTLLIB_COMPUTE_FCS (1<<1)
+#define CFG_RTLLIB_RESERVE_FCS (1 << 0)
+#define CFG_RTLLIB_COMPUTE_FCS (1 << 1)
 
 struct tx_pending {
        int frag;
@@ -1288,7 +1288,7 @@ struct rtllib_device {
        u16 scan_watch_dog;
 
        /* map of allowed channels. 0 is dummy */
-       u8 active_channel_map[MAX_CHANNEL_NUMBER+1];
+       u8 active_channel_map[MAX_CHANNEL_NUMBER + 1];
 
        int rate;       /* current rate */
        int basic_rate;
@@ -1486,32 +1486,32 @@ struct rtllib_device {
 /* Uses the channel change callback directly
  * instead of [start/stop] scan callbacks
  */
-#define IEEE_SOFTMAC_SCAN (1<<2)
+#define IEEE_SOFTMAC_SCAN (1 << 2)
 
 /* Perform authentication and association handshake */
-#define IEEE_SOFTMAC_ASSOCIATE (1<<3)
+#define IEEE_SOFTMAC_ASSOCIATE (1 << 3)
 
 /* Generate probe requests */
-#define IEEE_SOFTMAC_PROBERQ (1<<4)
+#define IEEE_SOFTMAC_PROBERQ (1 << 4)
 
 /* Generate response to probe requests */
-#define IEEE_SOFTMAC_PROBERS (1<<5)
+#define IEEE_SOFTMAC_PROBERS (1 << 5)
 
 /* The ieee802.11 stack will manage the netif queue
  * wake/stop for the driver, taking care of 802.11
  * fragmentation. See softmac.c for details.
  */
-#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
+#define IEEE_SOFTMAC_TX_QUEUE (1 << 7)
 
 /* Uses only the softmac_data_hard_start_xmit
  * even for TX management frames.
  */
-#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
+#define IEEE_SOFTMAC_SINGLE_QUEUE (1 << 8)
 
 /* Generate beacons.  The stack will enqueue beacons
  * to the card
  */
-#define IEEE_SOFTMAC_BEACONS (1<<6)
+#define IEEE_SOFTMAC_BEACONS (1 << 6)
 
 static inline void *rtllib_priv(struct net_device *dev)
 {