pinctrl: actions: define pad control configurtion to SoC specific

pad control for s900 and s700 are differs in number of
pull control configuraions
s900 has 4 pull controls - high impedence, pull up, pull down, repeater
s700, s500 has 2 pull controls - pull up and pull down

so pad control configuration has to SoC specific, moved out from pinctrl
common to s900 specific.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/actions/pinctrl-owl.c b/drivers/pinctrl/actions/pinctrl-owl.c
index 9d18c02f192b3ef8cc5e5ea4b109458ce28744de..cc242d6a47c31ab7e4666a63e0f0e9425eec3892 100644 (file)
--- a/drivers/pinctrl/actions/pinctrl-owl.c
+++ b/drivers/pinctrl/actions/pinctrl-owl.c
@@ -246,60 +246,6 @@ static int owl_pad_pinconf_reg(const struct owl_padinfo *info,
        return 0;
 }
 
-static int owl_pad_pinconf_arg2val(const struct owl_padinfo *info,
-                               unsigned int param,
-                               u32 *arg)
-{
-       switch (param) {
-       case PIN_CONFIG_BIAS_BUS_HOLD:
-               *arg = OWL_PINCONF_PULL_HOLD;
-               break;
-       case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
-               *arg = OWL_PINCONF_PULL_HIZ;
-               break;
-       case PIN_CONFIG_BIAS_PULL_DOWN:
-               *arg = OWL_PINCONF_PULL_DOWN;
-               break;
-       case PIN_CONFIG_BIAS_PULL_UP:
-               *arg = OWL_PINCONF_PULL_UP;
-               break;
-       case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-               *arg = (*arg >= 1 ? 1 : 0);
-               break;
-       default:
-               return -ENOTSUPP;
-       }
-
-       return 0;
-}
-
-static int owl_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
-                               unsigned int param,
-                               u32 *arg)
-{
-       switch (param) {
-       case PIN_CONFIG_BIAS_BUS_HOLD:
-               *arg = *arg == OWL_PINCONF_PULL_HOLD;
-               break;
-       case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
-               *arg = *arg == OWL_PINCONF_PULL_HIZ;
-               break;
-       case PIN_CONFIG_BIAS_PULL_DOWN:
-               *arg = *arg == OWL_PINCONF_PULL_DOWN;
-               break;
-       case PIN_CONFIG_BIAS_PULL_UP:
-               *arg = *arg == OWL_PINCONF_PULL_UP;
-               break;
-       case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-               *arg = *arg == 1;
-               break;
-       default:
-               return -ENOTSUPP;
-       }
-
-       return 0;
-}
-
 static int owl_pin_config_get(struct pinctrl_dev *pctrldev,
                                unsigned int pin,
                                unsigned long *config)
@@ -318,7 +264,10 @@ static int owl_pin_config_get(struct pinctrl_dev *pctrldev,
 
        arg = owl_read_field(pctrl, reg, bit, width);
 
-       ret = owl_pad_pinconf_val2arg(info, param, &arg);
+       if (!pctrl->soc->padctl_val2arg)
+               return -ENOTSUPP;
+
+       ret = pctrl->soc->padctl_val2arg(info, param, &arg);
        if (ret)
                return ret;
 
@@ -349,7 +298,10 @@ static int owl_pin_config_set(struct pinctrl_dev *pctrldev,
                if (ret)
                        return ret;
 
-               ret = owl_pad_pinconf_arg2val(info, param, &arg);
+               if (!pctrl->soc->padctl_arg2val)
+                       return -ENOTSUPP;
+
+               ret = pctrl->soc->padctl_arg2val(info, param, &arg);
                if (ret)
                        return ret;
 

diff --git a/drivers/pinctrl/actions/pinctrl-owl.h b/drivers/pinctrl/actions/pinctrl-owl.h
index 31cc33d7c4a527cc6ef0df940cc2a7b50e74ff8f..dae2e8363fd5d7e63f6a22ee7c61c6e9ac047579 100644 (file)
--- a/drivers/pinctrl/actions/pinctrl-owl.h
+++ b/drivers/pinctrl/actions/pinctrl-owl.h
@@ -145,13 +145,6 @@
                .shared_ctl_offset = _share,                    \
        }
 
-enum owl_pinconf_pull {
-       OWL_PINCONF_PULL_HIZ,
-       OWL_PINCONF_PULL_DOWN,
-       OWL_PINCONF_PULL_UP,
-       OWL_PINCONF_PULL_HOLD,
-};
-
 enum owl_pinconf_drv {
        OWL_PINCONF_DRV_2MA,
        OWL_PINCONF_DRV_4MA,
@@ -305,6 +298,12 @@ struct owl_pinctrl_soc_data {
        unsigned int ngpios;
        const struct owl_gpio_port *ports;
        unsigned int nports;
+       int (*padctl_val2arg)(const struct owl_padinfo *padinfo,
+                               unsigned int param,
+                               u32 *arg);
+       int (*padctl_arg2val)(const struct owl_padinfo *info,
+                               unsigned int param,
+                               u32 *arg);
 };
 
 int owl_pinctrl_probe(struct platform_device *pdev,

diff --git a/drivers/pinctrl/actions/pinctrl-s900.c b/drivers/pinctrl/actions/pinctrl-s900.c
index 0597009d8369215c6d08687e45ed500728db0024..9492b86852e7a9e15cb9783acecd34cca00188fe 100644 (file)
--- a/drivers/pinctrl/actions/pinctrl-s900.c
+++ b/drivers/pinctrl/actions/pinctrl-s900.c
@@ -13,6 +13,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
 #include "pinctrl-owl.h"
 
 /* Pinctrl registers offset */
@@ -1717,6 +1718,67 @@ static const struct owl_gpio_port s900_gpio_ports[] = {
        OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8, 0x460, 0x140, 0x144, 0x178, 0)
 };
 
+enum s900_pinconf_pull {
+       OWL_PINCONF_PULL_HIZ,
+       OWL_PINCONF_PULL_DOWN,
+       OWL_PINCONF_PULL_UP,
+       OWL_PINCONF_PULL_HOLD,
+};
+
+static int s900_pad_pinconf_arg2val(const struct owl_padinfo *info,
+                               unsigned int param,
+                               u32 *arg)
+{
+       switch (param) {
+       case PIN_CONFIG_BIAS_BUS_HOLD:
+               *arg = OWL_PINCONF_PULL_HOLD;
+               break;
+       case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+               *arg = OWL_PINCONF_PULL_HIZ;
+               break;
+       case PIN_CONFIG_BIAS_PULL_DOWN:
+               *arg = OWL_PINCONF_PULL_DOWN;
+               break;
+       case PIN_CONFIG_BIAS_PULL_UP:
+               *arg = OWL_PINCONF_PULL_UP;
+               break;
+       case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+               *arg = (*arg >= 1 ? 1 : 0);
+               break;
+       default:
+               return -ENOTSUPP;
+       }
+
+       return 0;
+}
+
+static int s900_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
+                               unsigned int param,
+                               u32 *arg)
+{
+       switch (param) {
+       case PIN_CONFIG_BIAS_BUS_HOLD:
+               *arg = *arg == OWL_PINCONF_PULL_HOLD;
+               break;
+       case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+               *arg = *arg == OWL_PINCONF_PULL_HIZ;
+               break;
+       case PIN_CONFIG_BIAS_PULL_DOWN:
+               *arg = *arg == OWL_PINCONF_PULL_DOWN;
+               break;
+       case PIN_CONFIG_BIAS_PULL_UP:
+               *arg = *arg == OWL_PINCONF_PULL_UP;
+               break;
+       case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+               *arg = *arg == 1;
+               break;
+       default:
+               return -ENOTSUPP;
+       }
+
+       return 0;
+}
+
 static struct owl_pinctrl_soc_data s900_pinctrl_data = {
        .padinfo = s900_padinfo,
        .pins = (const struct pinctrl_pin_desc *)s900_pads,
@@ -1727,7 +1789,9 @@ static struct owl_pinctrl_soc_data s900_pinctrl_data = {
        .ngroups = ARRAY_SIZE(s900_groups),
        .ngpios = NUM_GPIOS,
        .ports = s900_gpio_ports,
-       .nports = ARRAY_SIZE(s900_gpio_ports)
+       .nports = ARRAY_SIZE(s900_gpio_ports),
+       .padctl_arg2val = s900_pad_pinconf_arg2val,
+       .padctl_val2arg = s900_pad_pinconf_val2arg,
 };
 
 static int s900_pinctrl_probe(struct platform_device *pdev)