ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet

This patch moves pin EIM_D23 (phy reset) from pinctrl_hog to pinctrl_enet.
It also explicitly sets the pad to 0x000b0.

Before this patch, it has the value 0x1b0b0 if using mainline u-boot.
So this patch also removes hysteresis and a 100K pullup since the pad
is always an output.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 9b78cf8285840257eb2bbe7ebd04fb93726d3326..bbc05830c43199272dce9536eda6f154bfa91b19 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -114,7 +114,6 @@
        imx6q-sabrelite {
                pinctrl_hog: hoggrp {
                        fsl,pins = <
-                               MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
                                MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
                        >;
                };
@@ -155,6 +154,8 @@
                                MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
                                MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
                                MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+                               /* Phy reset */
+                               MX6QDL_PAD_EIM_D23__GPIO3_IO23          0x000b0
                        >;
                };