media: i2c: imx290: Register 0x3011 varies between imx327 and imx290

Reviewing the datasheets, register 0x3011 is meant to be 0x02 on imx327
and 0x00 on imx290.

Move it out of the common registers, and set it appropriately in the
sensor specific sections. (Included for imx290 to be explicit, rather
than relying on the default value).

Fixes: 2d41947ec2c0 ("media: i2c: imx290: Add support for imx327 variant")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index baff3cc7bb6ad75bf874e4453e32883db66cf8cf..b5fc35ed83a059b87e392a318811ada7ca5ad78d 100644 (file)
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -268,7 +268,6 @@ static const struct cci_reg_sequence imx290_global_init_settings[] = {
        { IMX290_WINWV, 1097 },
        { IMX290_XSOUTSEL, IMX290_XSOUTSEL_XVSOUTSEL_VSYNC |
                           IMX290_XSOUTSEL_XHSOUTSEL_HSYNC },
-       { CCI_REG8(0x3011), 0x02 },
        { CCI_REG8(0x3012), 0x64 },
        { CCI_REG8(0x3013), 0x00 },
 };
@@ -276,6 +275,7 @@ static const struct cci_reg_sequence imx290_global_init_settings[] = {
 static const struct cci_reg_sequence imx290_global_init_settings_290[] = {
        { CCI_REG8(0x300f), 0x00 },
        { CCI_REG8(0x3010), 0x21 },
+       { CCI_REG8(0x3011), 0x00 },
        { CCI_REG8(0x3016), 0x09 },
        { CCI_REG8(0x3070), 0x02 },
        { CCI_REG8(0x3071), 0x11 },
@@ -329,6 +329,7 @@ static const struct cci_reg_sequence xclk_regs[][IMX290_NUM_CLK_REGS] = {
 };
 
 static const struct cci_reg_sequence imx290_global_init_settings_327[] = {
+       { CCI_REG8(0x3011), 0x02 },
        { CCI_REG8(0x309e), 0x4A },
        { CCI_REG8(0x309f), 0x4A },
        { CCI_REG8(0x313b), 0x61 },