misc: Add ab8500 pwm driver

This patch adds a Pulse Width Modulation driver for Analog Baseband
Chip AB8500.

Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 373783146b5ef519221007d73d7c7037b85b3f2f..4132b5395fc40de53ab12e0f17f690685854ec44 100644 (file)
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -404,10 +404,21 @@ static struct mfd_cell ab8500_devs[] = {
                .num_resources = ARRAY_SIZE(ab8500_rtc_resources),
                .resources = ab8500_rtc_resources,
        },
+       {
+               .name = "ab8500-pwm",
+               .id = 1,
+       },
+       {
+               .name = "ab8500-pwm",
+               .id = 2,
+       },
+       {
+               .name = "ab8500-pwm",
+               .id = 3,
+       },
        { .name = "ab8500-charger", },
        { .name = "ab8500-audio", },
        { .name = "ab8500-usb", },
-       { .name = "ab8500-pwm", },
        { .name = "ab8500-regulator", },
        {
                .name = "ab8500-poweron-key",

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 39a2173b4e6cd0e10216fa7f4736977ca2a02ef5..4d073f1e4502471c43feeea44cd89d005d3bd3a8 100644 (file)
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -62,6 +62,15 @@ config ATMEL_PWM
          purposes including software controlled power-efficient backlights
          on LCD displays, motor control, and waveform generation.
 
+config AB8500_PWM
+       bool "AB8500 PWM support"
+       depends on AB8500_CORE
+       select HAVE_PWM
+       help
+         This driver exports functions to enable/disble/config/free Pulse
+         Width Modulation in the Analog Baseband Chip AB8500.
+         It is used by led and backlight driver to control the intensity.
+
 config ATMEL_TCLIB
        bool "Atmel AT32/AT91 Timer/Counter Library"
        depends on (AVR32 || ARCH_AT91)

diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 47af4cd08f01bd0447555ec4192efe3d2970b771..98009cc20cb9c6c887a200bfe96c85948a311be5 100644 (file)
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -41,3 +41,4 @@ obj-$(CONFIG_VMWARE_BALLOON)  += vmw_balloon.o
 obj-$(CONFIG_ARM_CHARLCD)      += arm-charlcd.o
 obj-$(CONFIG_PCH_PHUB)         += pch_phub.o
 obj-y                          += ti-st/
+obj-$(CONFIG_AB8500_PWM)       += ab8500-pwm.o

diff --git a/drivers/misc/ab8500-pwm.c b/drivers/misc/ab8500-pwm.c
new file mode 100644 (file)
index 0000000..54e3d05
--- /dev/null
+++ b/drivers/misc/ab8500-pwm.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Arun R Murthy <arun.murthy@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pwm.h>
+#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500.h>
+
+/*
+ * PWM Out generators
+ * Bank: 0x10
+ */
+#define AB8500_PWM_OUT_CTRL1_REG       0x60
+#define AB8500_PWM_OUT_CTRL2_REG       0x61
+#define AB8500_PWM_OUT_CTRL7_REG       0x66
+
+/* backlight driver constants */
+#define ENABLE_PWM                     1
+#define DISABLE_PWM                    0
+
+struct pwm_device {
+       struct device *dev;
+       struct list_head node;
+       const char *label;
+       unsigned int pwm_id;
+};
+
+static LIST_HEAD(pwm_list);
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+       int ret = 0;
+       unsigned int higher_val, lower_val;
+       u8 reg;
+
+       /*
+        * get the first 8 bits that are be written to
+        * AB8500_PWM_OUT_CTRL1_REG[0:7]
+        */
+       lower_val = duty_ns & 0x00FF;
+       /*
+        * get bits [9:10] that are to be written to
+        * AB8500_PWM_OUT_CTRL2_REG[0:1]
+        */
+       higher_val = ((duty_ns & 0x0300) >> 8);
+
+       reg = AB8500_PWM_OUT_CTRL1_REG + ((pwm->pwm_id - 1) * 2);
+
+       ret = abx500_set_register_interruptible(pwm->dev, AB8500_MISC,
+                       reg, (u8)lower_val);
+       if (ret < 0)
+               return ret;
+       ret = abx500_set_register_interruptible(pwm->dev, AB8500_MISC,
+                       (reg + 1), (u8)higher_val);
+
+       return ret;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+       int ret;
+
+       ret = abx500_mask_and_set_register_interruptible(pwm->dev,
+                               AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
+                               1 << (pwm->pwm_id-1), ENABLE_PWM);
+       if (ret < 0)
+               dev_err(pwm->dev, "%s: Failed to disable PWM, Error %d\n",
+                                                       pwm->label, ret);
+       return ret;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+       int ret;
+
+       ret = abx500_mask_and_set_register_interruptible(pwm->dev,
+                               AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
+                               1 << (pwm->pwm_id-1), DISABLE_PWM);
+       if (ret < 0)
+               dev_err(pwm->dev, "%s: Failed to disable PWM, Error %d\n",
+                                                       pwm->label, ret);
+       return;
+}
+EXPORT_SYMBOL(pwm_disable);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+       struct pwm_device *pwm;
+
+       list_for_each_entry(pwm, &pwm_list, node) {
+               if (pwm->pwm_id == pwm_id) {
+                       pwm->label = label;
+                       pwm->pwm_id = pwm_id;
+                       return pwm;
+               }
+       }
+
+       return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+       pwm_disable(pwm);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static int __devinit ab8500_pwm_probe(struct platform_device *pdev)
+{
+       struct pwm_device *pwm;
+       /*
+        * Nothing to be done in probe, this is required to get the
+        * device which is required for ab8500 read and write
+        */
+       pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+       if (pwm == NULL) {
+               dev_err(&pdev->dev, "failed to allocate memory\n");
+               return -ENOMEM;
+       }
+       pwm->dev = &pdev->dev;
+       pwm->pwm_id = pdev->id;
+       list_add_tail(&pwm->node, &pwm_list);
+       platform_set_drvdata(pdev, pwm);
+       dev_dbg(pwm->dev, "pwm probe successful\n");
+       return 0;
+}
+
+static int __devexit ab8500_pwm_remove(struct platform_device *pdev)
+{
+       struct pwm_device *pwm = platform_get_drvdata(pdev);
+       list_del(&pwm->node);
+       dev_dbg(&pdev->dev, "pwm driver removed\n");
+       kfree(pwm);
+       return 0;
+}
+
+static struct platform_driver ab8500_pwm_driver = {
+       .driver = {
+               .name = "ab8500-pwm",
+               .owner = THIS_MODULE,
+       },
+       .probe = ab8500_pwm_probe,
+       .remove = __devexit_p(ab8500_pwm_remove),
+};
+
+static int __init ab8500_pwm_init(void)
+{
+       return platform_driver_register(&ab8500_pwm_driver);
+}
+
+static void __exit ab8500_pwm_exit(void)
+{
+       platform_driver_unregister(&ab8500_pwm_driver);
+}
+
+subsys_initcall(ab8500_pwm_init);
+module_exit(ab8500_pwm_exit);
+MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
+MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
+MODULE_ALIAS("AB8500 PWM driver");
+MODULE_LICENSE("GPL v2");