--- /dev/null
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#include "dsi_pll.h"
+#include "dsi.xml.h"
+
+/*
+ * DSI PLL 14nm - clock diagram (eg: DSI0):
+ *
+ * dsi0n1_postdiv_clk
+ * |
+ * |
+ * +----+ | +----+
+ * dsi0vco_clk ---| n1 |--o--| /8 |-- dsi0pllbyte
+ * +----+ | +----+
+ * | dsi0n1_postdivby2_clk
+ * | +----+ |
+ * o---| /2 |--o--|\
+ * | +----+ | \ +----+
+ * | | |--| n2 |-- dsi0pll
+ * o--------------| / +----+
+ * |/
+ */
+
+#define POLL_MAX_READS 15
+#define POLL_TIMEOUT_US 1000
+
+#define NUM_PROVIDED_CLKS 2
+
+#define VCO_REF_CLK_RATE 19200000
+#define VCO_MIN_RATE 1300000000UL
+#define VCO_MAX_RATE 2600000000UL
+
+#define DSI_BYTE_PLL_CLK 0
+#define DSI_PIXEL_PLL_CLK 1
+
+#define DSI_PLL_DEFAULT_VCO_POSTDIV 1
+
+struct dsi_pll_input {
+ u32 fref; /* reference clk */
+ u32 fdata; /* bit clock rate */
+ u32 dsiclk_sel; /* Mux configuration (see diagram) */
+ u32 ssc_en; /* SSC enable/disable */
+ u32 ldo_en;
+
+ /* fixed params */
+ u32 refclk_dbler_en;
+ u32 vco_measure_time;
+ u32 kvco_measure_time;
+ u32 bandgap_timer;
+ u32 pll_wakeup_timer;
+ u32 plllock_cnt;
+ u32 plllock_rng;
+ u32 ssc_center;
+ u32 ssc_adj_period;
+ u32 ssc_spread;
+ u32 ssc_freq;
+ u32 pll_ie_trim;
+ u32 pll_ip_trim;
+ u32 pll_iptat_trim;
+ u32 pll_cpcset_cur;
+ u32 pll_cpmset_cur;
+
+ u32 pll_icpmset;
+ u32 pll_icpcset;
+
+ u32 pll_icpmset_p;
+ u32 pll_icpmset_m;
+
+ u32 pll_icpcset_p;
+ u32 pll_icpcset_m;
+
+ u32 pll_lpf_res1;
+ u32 pll_lpf_cap1;
+ u32 pll_lpf_cap2;
+ u32 pll_c3ctrl;
+ u32 pll_r3ctrl;
+};
+
+struct dsi_pll_output {
+ u32 pll_txclk_en;
+ u32 dec_start;
+ u32 div_frac_start;
+ u32 ssc_period;
+ u32 ssc_step_size;
+ u32 plllock_cmp;
+ u32 pll_vco_div_ref;
+ u32 pll_vco_count;
+ u32 pll_kvco_div_ref;
+ u32 pll_kvco_count;
+ u32 pll_misc1;
+ u32 pll_lpf2_postdiv;
+ u32 pll_resetsm_cntrl;
+ u32 pll_resetsm_cntrl2;
+ u32 pll_resetsm_cntrl5;
+ u32 pll_kvco_code;
+
+ u32 cmn_clk_cfg0;
+ u32 cmn_clk_cfg1;
+ u32 cmn_ldo_cntrl;
+
+ u32 pll_postdiv;
+ u32 fcvo;
+};
+
+struct pll_14nm_cached_state {
+ unsigned long vco_rate;
+ u8 n2postdiv;
+ u8 n1postdiv;
+};
+
+struct dsi_pll_14nm {
+ struct msm_dsi_pll base;
+
+ int id;
+ struct platform_device *pdev;
+
+ void __iomem *phy_cmn_mmio;
+ void __iomem *mmio;
+
+ int vco_delay;
+
+ struct dsi_pll_input in;
+ struct dsi_pll_output out;
+
+ /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */
+ spinlock_t postdiv_lock;
+
+ u64 vco_current_rate;
+ u64 vco_ref_clk_rate;
+
+ /* private clocks: */
+ struct clk_hw *hws[NUM_DSI_CLOCKS_MAX];
+ u32 num_hws;
+
+ /* clock-provider: */
+ struct clk_hw_onecell_data *hw_data;
+
+ struct pll_14nm_cached_state cached_state;
+
+ enum msm_dsi_phy_usecase uc;
+ struct dsi_pll_14nm *slave;
+};
+
+#define to_pll_14nm(x) container_of(x, struct dsi_pll_14nm, base)
+
+/*
+ * Private struct for N1/N2 post-divider clocks. These clocks are similar to
+ * the generic clk_divider class of clocks. The only difference is that it
+ * also sets the slave DSI PLL's post-dividers if in Dual DSI mode
+ */
+struct dsi_pll_14nm_postdiv {
+ struct clk_hw hw;
+
+ /* divider params */
+ u8 shift;
+ u8 width;
+ u8 flags; /* same flags as used by clk_divider struct */
+
+ struct dsi_pll_14nm *pll;
+};
+
+#define to_pll_14nm_postdiv(_hw) container_of(_hw, struct dsi_pll_14nm_postdiv, hw)
+
+/*
+ * Global list of private DSI PLL struct pointers. We need this for Dual DSI
+ * mode, where the master PLL's clk_ops needs access the slave's private data
+ */
+static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX];
+
+static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,
+ u32 nb_tries, u32 timeout_us)
+{
+ bool pll_locked = false;
+ void __iomem *base = pll_14nm->mmio;
+ u32 tries, val;
+
+ tries = nb_tries;
+ while (tries--) {
+ val = pll_read(base +
+ REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
+ pll_locked = !!(val & BIT(5));
+
+ if (pll_locked)
+ break;
+
+ udelay(timeout_us);
+ }
+
+ if (!pll_locked) {
+ tries = nb_tries;
+ while (tries--) {
+ val = pll_read(base +
+ REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
+ pll_locked = !!(val & BIT(0));
+
+ if (pll_locked)
+ break;
+
+ udelay(timeout_us);
+ }
+ }
+
+ DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
+
+ return pll_locked;
+}
+
+static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll)
+{
+ pll->in.fref = pll->vco_ref_clk_rate;
+ pll->in.fdata = 0;
+ pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */
+ pll->in.ldo_en = 0; /* disabled for now */
+
+ /* fixed input */
+ pll->in.refclk_dbler_en = 0;
+ pll->in.vco_measure_time = 5;
+ pll->in.kvco_measure_time = 5;
+ pll->in.bandgap_timer = 4;
+ pll->in.pll_wakeup_timer = 5;
+ pll->in.plllock_cnt = 1;
+ pll->in.plllock_rng = 0;
+
+ /*
+ * SSC is enabled by default. We might need DT props for configuring
+ * some SSC params like PPM and center/down spread etc.
+ */
+ pll->in.ssc_en = 1;
+ pll->in.ssc_center = 0; /* down spread by default */
+ pll->in.ssc_spread = 5; /* PPM / 1000 */
+ pll->in.ssc_freq = 31500; /* default recommended */
+ pll->in.ssc_adj_period = 37;
+
+ pll->in.pll_ie_trim = 4;
+ pll->in.pll_ip_trim = 4;
+ pll->in.pll_cpcset_cur = 1;
+ pll->in.pll_cpmset_cur = 1;
+ pll->in.pll_icpmset = 4;
+ pll->in.pll_icpcset = 4;
+ pll->in.pll_icpmset_p = 0;
+ pll->in.pll_icpmset_m = 0;
+ pll->in.pll_icpcset_p = 0;
+ pll->in.pll_icpcset_m = 0;
+ pll->in.pll_lpf_res1 = 3;
+ pll->in.pll_lpf_cap1 = 11;
+ pll->in.pll_lpf_cap2 = 1;
+ pll->in.pll_iptat_trim = 7;
+ pll->in.pll_c3ctrl = 2;
+ pll->in.pll_r3ctrl = 1;
+}
+
+#define CEIL(x, y) (((x) + ((y) - 1)) / (y))
+
+static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll)
+{
+ u32 period, ssc_period;
+ u32 ref, rem;
+ u64 step_size;
+
+ DBG("vco=%lld ref=%lld", pll->vco_current_rate, pll->vco_ref_clk_rate);
+
+ ssc_period = pll->in.ssc_freq / 500;
+ period = (u32)pll->vco_ref_clk_rate / 1000;
+ ssc_period = CEIL(period, ssc_period);
+ ssc_period -= 1;
+ pll->out.ssc_period = ssc_period;
+
+ DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq,
+ pll->in.ssc_spread, pll->out.ssc_period);
+
+ step_size = (u32)pll->vco_current_rate;
+ ref = pll->vco_ref_clk_rate;
+ ref /= 1000;
+ step_size = div_u64(step_size, ref);
+ step_size <<= 20;
+ step_size = div_u64(step_size, 1000);
+ step_size *= pll->in.ssc_spread;
+ step_size = div_u64(step_size, 1000);
+ step_size *= (pll->in.ssc_adj_period + 1);
+
+ rem = 0;
+ step_size = div_u64_rem(step_size, ssc_period + 1, &rem);
+ if (rem)
+ step_size++;
+
+ DBG("step_size=%lld", step_size);
+
+ step_size &= 0x0ffff; /* take lower 16 bits */
+
+ pll->out.ssc_step_size = step_size;
+}
+
+static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll)
+{
+ struct dsi_pll_input *pin = &pll->in;
+ struct dsi_pll_output *pout = &pll->out;
+ u64 multiplier = BIT(20);
+ u64 dec_start_multiple, dec_start, pll_comp_val;
+ u32 duration, div_frac_start;
+ u64 vco_clk_rate = pll->vco_current_rate;
+ u64 fref = pll->vco_ref_clk_rate;
+
+ DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref);
+
+ dec_start_multiple = div_u64(vco_clk_rate * multiplier, fref);
+ div_u64_rem(dec_start_multiple, multiplier, &div_frac_start);
+
+ dec_start = div_u64(dec_start_multiple, multiplier);
+
+ pout->dec_start = (u32)dec_start;
+ pout->div_frac_start = div_frac_start;
+
+ if (pin->plllock_cnt == 0)
+ duration = 1024;
+ else if (pin->plllock_cnt == 1)
+ duration = 256;
+ else if (pin->plllock_cnt == 2)
+ duration = 128;
+ else
+ duration = 32;
+
+ pll_comp_val = duration * dec_start_multiple;
+ pll_comp_val = div_u64(pll_comp_val, multiplier);
+ do_div(pll_comp_val, 10);
+
+ pout->plllock_cmp = (u32)pll_comp_val;
+
+ pout->pll_txclk_en = 1;
+ pout->cmn_ldo_cntrl = 0x3c;
+}
+
+static u32 pll_14nm_kvco_slop(u32 vrate)
+{
+ u32 slop = 0;
+
+ if (vrate > VCO_MIN_RATE && vrate <= 1800000000UL)
+ slop = 600;
+ else if (vrate > 1800000000UL && vrate < 2300000000UL)
+ slop = 400;
+ else if (vrate > 2300000000UL && vrate < VCO_MAX_RATE)
+ slop = 280;
+
+ return slop;
+}
+
+static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll)
+{
+ struct dsi_pll_input *pin = &pll->in;
+ struct dsi_pll_output *pout = &pll->out;
+ u64 vco_clk_rate = pll->vco_current_rate;
+ u64 fref = pll->vco_ref_clk_rate;
+ u64 data;
+ u32 cnt;
+
+ data = fref * pin->vco_measure_time;
+ do_div(data, 1000000);
+ data &= 0x03ff; /* 10 bits */
+ data -= 2;
+ pout->pll_vco_div_ref = data;
+
+ data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */
+ data *= pin->vco_measure_time;
+ do_div(data, 10);
+ pout->pll_vco_count = data;
+
+ data = fref * pin->kvco_measure_time;
+ do_div(data, 1000000);
+ data &= 0x03ff; /* 10 bits */
+ data -= 1;
+ pout->pll_kvco_div_ref = data;
+
+ cnt = pll_14nm_kvco_slop(vco_clk_rate);
+ cnt *= 2;
+ cnt /= 100;
+ cnt *= pin->kvco_measure_time;
+ pout->pll_kvco_count = cnt;
+
+ pout->pll_misc1 = 16;
+ pout->pll_resetsm_cntrl = 48;
+ pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3;
+ pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer;
+ pout->pll_kvco_code = 0;
+}
+
+static void pll_db_commit_ssc(struct dsi_pll_14nm *pll)
+{
+ void __iomem *base = pll->mmio;
+ struct dsi_pll_input *pin = &pll->in;
+ struct dsi_pll_output *pout = &pll->out;
+ u8 data;
+
+ data = pin->ssc_adj_period;
+ data &= 0x0ff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data);
+ data = (pin->ssc_adj_period >> 8);
+ data &= 0x03;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data);
+
+ data = pout->ssc_period;
+ data &= 0x0ff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data);
+ data = (pout->ssc_period >> 8);
+ data &= 0x0ff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data);
+
+ data = pout->ssc_step_size;
+ data &= 0x0ff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data);
+ data = (pout->ssc_step_size >> 8);
+ data &= 0x0ff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data);
+
+ data = (pin->ssc_center & 0x01);
+ data <<= 1;
+ data |= 0x01; /* enable */
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data);
+
+ wmb(); /* make sure register committed */
+}
+
+static void pll_db_commit_common(struct dsi_pll_14nm *pll,
+ struct dsi_pll_input *pin,
+ struct dsi_pll_output *pout)
+{
+ void __iomem *base = pll->mmio;
+ u8 data;
+
+ /* confgiure the non frequency dependent pll registers */
+ data = 0;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data);
+
+ data = pout->pll_txclk_en;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data);
+
+ data = pout->pll_resetsm_cntrl;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data);
+ data = pout->pll_resetsm_cntrl2;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data);
+ data = pout->pll_resetsm_cntrl5;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data);
+
+ data = pout->pll_vco_div_ref & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data);
+ data = (pout->pll_vco_div_ref >> 8) & 0x3;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data);
+
+ data = pout->pll_kvco_div_ref & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data);
+ data = (pout->pll_kvco_div_ref >> 8) & 0x3;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data);
+
+ data = pout->pll_misc1;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data);
+
+ data = pin->pll_ie_trim;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data);
+
+ data = pin->pll_ip_trim;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data);
+
+ data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data);
+
+ data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data);
+
+ data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data);
+
+ data = pin->pll_icpmset << 3 | pin->pll_icpcset;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data);
+
+ data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data);
+
+ data = pin->pll_iptat_trim;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data);
+
+ data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data);
+}
+
+static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm)
+{
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+
+ /* de assert pll start and apply pll sw reset */
+
+ /* stop pll */
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0);
+
+ /* pll sw reset */
+ pll_write_udelay(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x20, 10);
+ wmb(); /* make sure register committed */
+
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0);
+ wmb(); /* make sure register committed */
+}
+
+static void pll_db_commit_14nm(struct dsi_pll_14nm *pll,
+ struct dsi_pll_input *pin,
+ struct dsi_pll_output *pout)
+{
+ void __iomem *base = pll->mmio;
+ void __iomem *cmn_base = pll->phy_cmn_mmio;
+ u8 data;
+
+ DBG("DSI%d PLL", pll->id);
+
+ data = pout->cmn_ldo_cntrl;
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data);
+
+ pll_db_commit_common(pll, pin, pout);
+
+ pll_14nm_software_reset(pll);
+
+ data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data);
+
+ data = 0xff; /* data, clk, pll normal operation */
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data);
+
+ /* configure the frequency dependent pll registers */
+ data = pout->dec_start;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data);
+
+ data = pout->div_frac_start & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data);
+ data = (pout->div_frac_start >> 8) & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data);
+ data = (pout->div_frac_start >> 16) & 0xf;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data);
+
+ data = pout->plllock_cmp & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data);
+
+ data = (pout->plllock_cmp >> 8) & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data);
+
+ data = (pout->plllock_cmp >> 16) & 0x3;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data);
+
+ data = pin->plllock_cnt << 1 | pin->plllock_rng << 3;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data);
+
+ data = pout->pll_vco_count & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data);
+ data = (pout->pll_vco_count >> 8) & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data);
+
+ data = pout->pll_kvco_count & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data);
+ data = (pout->pll_kvco_count >> 8) & 0x3;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data);
+
+ data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data);
+
+ if (pin->ssc_en)
+ pll_db_commit_ssc(pll);
+
+ wmb(); /* make sure register committed */
+}
+
+/*
+ * VCO clock Callbacks
+ */
+static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ struct dsi_pll_input *pin = &pll_14nm->in;
+ struct dsi_pll_output *pout = &pll_14nm->out;
+
+ DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->id, rate,
+ parent_rate);
+
+ pll_14nm->vco_current_rate = rate;
+ pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
+
+ dsi_pll_14nm_input_init(pll_14nm);
+
+ /*
+ * This configures the post divider internal to the VCO. It's
+ * fixed to divide by 1 for now.
+ *
+ * tx_band = pll_postdiv.
+ * 0: divided by 1
+ * 1: divided by 2
+ * 2: divided by 4
+ * 3: divided by 8
+ */
+ pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV;
+
+ pll_14nm_dec_frac_calc(pll_14nm);
+
+ if (pin->ssc_en)
+ pll_14nm_ssc_calc(pll_14nm);
+
+ pll_14nm_calc_vco_count(pll_14nm);
+
+ /* commit the slave DSI PLL registers if we're master. Note that we
+ * don't lock the slave PLL. We just ensure that the PLL/PHY registers
+ * of the master and slave are identical
+ */
+ if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
+ struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
+
+ pll_db_commit_14nm(pll_14nm_slave, pin, pout);
+ }
+
+ pll_db_commit_14nm(pll_14nm, pin, pout);
+
+ return 0;
+}
+
+static unsigned long dsi_pll_14nm_vco_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ void __iomem *base = pll_14nm->mmio;
+ u64 vco_rate, multiplier = BIT(20);
+ u32 div_frac_start;
+ u32 dec_start;
+ u64 ref_clk = parent_rate;
+
+ dec_start = pll_read(base + REG_DSI_14nm_PHY_PLL_DEC_START);
+ dec_start &= 0x0ff;
+
+ DBG("dec_start = %x", dec_start);
+
+ div_frac_start = (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3)
+ & 0xf) << 16;
+ div_frac_start |= (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2)
+ & 0xff) << 8;
+ div_frac_start |= pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1)
+ & 0xff;
+
+ DBG("div_frac_start = %x", div_frac_start);
+
+ vco_rate = ref_clk * dec_start;
+
+ vco_rate += ((ref_clk * div_frac_start) / multiplier);
+
+ /*
+ * Recalculating the rate from dec_start and frac_start doesn't end up
+ * the rate we originally set. Convert the freq to KHz, round it up and
+ * convert it back to MHz.
+ */
+ vco_rate = DIV_ROUND_UP_ULL(vco_rate, 1000) * 1000;
+
+ DBG("returning vco rate = %lu", (unsigned long)vco_rate);
+
+ return (unsigned long)vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_14nm_vco = {
+ .round_rate = msm_dsi_pll_helper_clk_round_rate,
+ .set_rate = dsi_pll_14nm_vco_set_rate,
+ .recalc_rate = dsi_pll_14nm_vco_recalc_rate,
+ .prepare = msm_dsi_pll_helper_clk_prepare,
+ .unprepare = msm_dsi_pll_helper_clk_unprepare,
+};
+
+/*
+ * N1 and N2 post-divider clock callbacks
+ */
+#define div_mask(width) ((1 << (width)) - 1)
+static unsigned long dsi_pll_14nm_postdiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
+ struct dsi_pll_14nm *pll_14nm = postdiv->pll;
+ void __iomem *base = pll_14nm->phy_cmn_mmio;
+ u8 shift = postdiv->shift;
+ u8 width = postdiv->width;
+ u32 val;
+
+ DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, parent_rate);
+
+ val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0) >> shift;
+ val &= div_mask(width);
+
+ return divider_recalc_rate(hw, parent_rate, val, NULL,
+ postdiv->flags);
+}
+
+static long dsi_pll_14nm_postdiv_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *prate)
+{
+ struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
+ struct dsi_pll_14nm *pll_14nm = postdiv->pll;
+
+ DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, rate);
+
+ return divider_round_rate(hw, rate, prate, NULL,
+ postdiv->width,
+ postdiv->flags);
+}
+
+static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
+ struct dsi_pll_14nm *pll_14nm = postdiv->pll;
+ void __iomem *base = pll_14nm->phy_cmn_mmio;
+ spinlock_t *lock = &pll_14nm->postdiv_lock;
+ u8 shift = postdiv->shift;
+ u8 width = postdiv->width;
+ unsigned int value;
+ unsigned long flags = 0;
+ u32 val;
+
+ DBG("DSI%d PLL parent rate=%lu parent rate %lu", pll_14nm->id, rate,
+ parent_rate);
+
+ value = divider_get_val(rate, parent_rate, NULL, postdiv->width,
+ postdiv->flags);
+
+ spin_lock_irqsave(lock, flags);
+
+ val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
+ val &= ~(div_mask(width) << shift);
+
+ val |= value << shift;
+ pll_write(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val);
+
+ /* If we're master in dual DSI mode, then the slave PLL's post-dividers
+ * follow the master's post dividers
+ */
+ if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
+ struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
+ void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio;
+
+ pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val);
+ }
+
+ spin_unlock_irqrestore(lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_14nm_postdiv = {
+ .recalc_rate = dsi_pll_14nm_postdiv_recalc_rate,
+ .round_rate = dsi_pll_14nm_postdiv_round_rate,
+ .set_rate = dsi_pll_14nm_postdiv_set_rate,
+};
+
+/*
+ * PLL Callbacks
+ */
+
+static int dsi_pll_14nm_enable_seq(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ void __iomem *base = pll_14nm->mmio;
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+ bool locked;
+
+ DBG("");
+
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10);
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1);
+
+ locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS,
+ POLL_TIMEOUT_US);
+
+ if (unlikely(!locked))
+ dev_err(&pll_14nm->pdev->dev, "DSI PLL lock failed\n");
+ else
+ DBG("DSI PLL lock success");
+
+ return locked ? 0 : -EINVAL;
+}
+
+static void dsi_pll_14nm_disable_seq(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+
+ DBG("");
+
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0);
+}
+
+static void dsi_pll_14nm_save_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+ u32 data;
+
+ data = pll_read(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
+
+ cached_state->n1postdiv = data & 0xf;
+ cached_state->n2postdiv = (data >> 4) & 0xf;
+
+ DBG("DSI%d PLL save state %x %x", pll_14nm->id,
+ cached_state->n1postdiv, cached_state->n2postdiv);
+
+ cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
+}
+
+static int dsi_pll_14nm_restore_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+ u32 data;
+ int ret;
+
+ ret = dsi_pll_14nm_vco_set_rate(&pll->clk_hw,
+ cached_state->vco_rate, 0);
+ if (ret) {
+ dev_err(&pll_14nm->pdev->dev,
+ "restore vco rate failed. ret=%d\n", ret);
+ return ret;
+ }
+
+ data = cached_state->n1postdiv | (cached_state->n2postdiv << 4);
+
+ DBG("DSI%d PLL restore state %x %x", pll_14nm->id,
+ cached_state->n1postdiv, cached_state->n2postdiv);
+
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data);
+
+ /* also restore post-dividers for slave DSI PLL */
+ if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
+ struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
+ void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio;
+
+ pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data);
+ }
+
+ return 0;
+}
+
+static int dsi_pll_14nm_set_usecase(struct msm_dsi_pll *pll,
+ enum msm_dsi_phy_usecase uc)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ void __iomem *base = pll_14nm->mmio;
+ u32 clkbuflr_en, bandgap = 0;
+
+ switch (uc) {
+ case MSM_DSI_PHY_STANDALONE:
+ clkbuflr_en = 0x1;
+ break;
+ case MSM_DSI_PHY_MASTER:
+ clkbuflr_en = 0x3;
+ pll_14nm->slave = pll_14nm_list[(pll_14nm->id + 1) % DSI_MAX];
+ break;
+ case MSM_DSI_PHY_SLAVE:
+ clkbuflr_en = 0x0;
+ bandgap = 0x3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ pll_write(base + REG_DSI_14nm_PHY_PLL_CLKBUFLR_EN, clkbuflr_en);
+ if (bandgap)
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_BANDGAP, bandgap);
+
+ pll_14nm->uc = uc;
+
+ return 0;
+}
+
+static int dsi_pll_14nm_get_provider(struct msm_dsi_pll *pll,
+ struct clk **byte_clk_provider,
+ struct clk **pixel_clk_provider)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ struct clk_hw_onecell_data *hw_data = pll_14nm->hw_data;
+
+ if (byte_clk_provider)
+ *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk;
+ if (pixel_clk_provider)
+ *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk;
+
+ return 0;
+}
+
+static void dsi_pll_14nm_destroy(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ struct platform_device *pdev = pll_14nm->pdev;
+ int num_hws = pll_14nm->num_hws;
+
+ of_clk_del_provider(pdev->dev.of_node);
+
+ while (num_hws--)
+ clk_hw_unregister(pll_14nm->hws[num_hws]);
+}
+
+static struct clk_hw *pll_14nm_postdiv_register(struct dsi_pll_14nm *pll_14nm,
+ const char *name,
+ const char *parent_name,
+ unsigned long flags,
+ u8 shift)
+{
+ struct dsi_pll_14nm_postdiv *pll_postdiv;
+ struct device *dev = &pll_14nm->pdev->dev;
+ struct clk_init_data postdiv_init = {
+ .parent_names = (const char *[]) { parent_name },
+ .num_parents = 1,
+ .name = name,
+ .flags = flags,
+ .ops = &clk_ops_dsi_pll_14nm_postdiv,
+ };
+ int ret;
+
+ pll_postdiv = devm_kzalloc(dev, sizeof(*pll_postdiv), GFP_KERNEL);
+ if (!pll_postdiv)
+ return ERR_PTR(-ENOMEM);
+
+ pll_postdiv->pll = pll_14nm;
+ pll_postdiv->shift = shift;
+ /* both N1 and N2 postdividers are 4 bits wide */
+ pll_postdiv->width = 4;
+ /* range of each divider is from 1 to 15 */
+ pll_postdiv->flags = CLK_DIVIDER_ONE_BASED;
+ pll_postdiv->hw.init = &postdiv_init;
+
+ ret = clk_hw_register(dev, &pll_postdiv->hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &pll_postdiv->hw;
+}
+
+static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm)
+{
+ char clk_name[32], parent[32], vco_name[32];
+ struct clk_init_data vco_init = {
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .name = vco_name,
+ .flags = CLK_IGNORE_UNUSED,
+ .ops = &clk_ops_dsi_pll_14nm_vco,
+ };
+ struct device *dev = &pll_14nm->pdev->dev;
+ struct clk_hw **hws = pll_14nm->hws;
+ struct clk_hw_onecell_data *hw_data;
+ struct clk_hw *hw;
+ int num = 0;
+ int ret;
+
+ DBG("DSI%d", pll_14nm->id);
+
+ hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
+ NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
+ GFP_KERNEL);
+ if (!hw_data)
+ return -ENOMEM;
+
+ snprintf(vco_name, 32, "dsi%dvco_clk", pll_14nm->id);
+ pll_14nm->base.clk_hw.init = &vco_init;
+
+ ret = clk_hw_register(dev, &pll_14nm->base.clk_hw);
+ if (ret)
+ return ret;
+
+ hws[num++] = &pll_14nm->base.clk_hw;
+
+ snprintf(clk_name, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
+ snprintf(parent, 32, "dsi%dvco_clk", pll_14nm->id);
+
+ /* N1 postdiv, bits 0-3 in REG_DSI_14nm_PHY_CMN_CLK_CFG0 */
+ hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent,
+ CLK_SET_RATE_PARENT, 0);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ hws[num++] = hw;
+
+ snprintf(clk_name, 32, "dsi%dpllbyte", pll_14nm->id);
+ snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
+
+ /* DSI Byte clock = VCO_CLK / N1 / 8 */
+ hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+ CLK_SET_RATE_PARENT, 1, 8);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ hws[num++] = hw;
+ hw_data->hws[DSI_BYTE_PLL_CLK] = hw;
+
+ snprintf(clk_name, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id);
+ snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
+
+ /*
+ * Skip the mux for now, force DSICLK_SEL to 1, Add a /2 divider
+ * on the way. Don't let it set parent.
+ */
+ hw = clk_hw_register_fixed_factor(dev, clk_name, parent, 0, 1, 2);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ hws[num++] = hw;
+
+ snprintf(clk_name, 32, "dsi%dpll", pll_14nm->id);
+ snprintf(parent, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id);
+
+ /* DSI pixel clock = VCO_CLK / N1 / 2 / N2
+ * This is the output of N2 post-divider, bits 4-7 in
+ * REG_DSI_14nm_PHY_CMN_CLK_CFG0. Don't let it set parent.
+ */
+ hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent, 0, 4);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ hws[num++] = hw;
+ hw_data->hws[DSI_PIXEL_PLL_CLK] = hw;
+
+ pll_14nm->num_hws = num;
+
+ hw_data->num = NUM_PROVIDED_CLKS;
+ pll_14nm->hw_data = hw_data;
+
+ ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ pll_14nm->hw_data);
+ if (ret) {
+ dev_err(dev, "failed to register clk provider: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_14nm_init(struct platform_device *pdev, int id)
+{
+ struct dsi_pll_14nm *pll_14nm;
+ struct msm_dsi_pll *pll;
+ int ret;
+
+ if (!pdev)
+ return ERR_PTR(-ENODEV);
+
+ pll_14nm = devm_kzalloc(&pdev->dev, sizeof(*pll_14nm), GFP_KERNEL);
+ if (!pll_14nm)
+ return ERR_PTR(-ENOMEM);
+
+ DBG("PLL%d", id);
+
+ pll_14nm->pdev = pdev;
+ pll_14nm->id = id;
+ pll_14nm_list[id] = pll_14nm;
+
+ pll_14nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
+ if (IS_ERR_OR_NULL(pll_14nm->phy_cmn_mmio)) {
+ dev_err(&pdev->dev, "failed to map CMN PHY base\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pll_14nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+ if (IS_ERR_OR_NULL(pll_14nm->mmio)) {
+ dev_err(&pdev->dev, "failed to map PLL base\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ spin_lock_init(&pll_14nm->postdiv_lock);
+
+ pll = &pll_14nm->base;
+ pll->min_rate = VCO_MIN_RATE;
+ pll->max_rate = VCO_MAX_RATE;
+ pll->get_provider = dsi_pll_14nm_get_provider;
+ pll->destroy = dsi_pll_14nm_destroy;
+ pll->disable_seq = dsi_pll_14nm_disable_seq;
+ pll->save_state = dsi_pll_14nm_save_state;
+ pll->restore_state = dsi_pll_14nm_restore_state;
+ pll->set_usecase = dsi_pll_14nm_set_usecase;
+
+ pll_14nm->vco_delay = 1;
+
+ pll->en_seq_cnt = 1;
+ pll->enable_seqs[0] = dsi_pll_14nm_enable_seq;
+
+ ret = pll_14nm_register(pll_14nm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register PLL: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ return pll;
+}
projects / users / willy / pagecache.git / commitdiff