drm/amdgpu: switch to golden tsc registers for raven/raven2

Due to raven/raven2 maybe enable  sclk slow down,
they cannot get clock count by the RLC at the auto level of dpm performance.
So switch to golden tsc register.

Suggested-by: shanshengwang <shansheng.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index ae09fc1cfe6b7aad38ad2ebd8ed7c5fdd60431a1..c99d9e642e514ca46fa453204cb2c652b3aa1199 100644 (file)
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -149,6 +149,16 @@ MODULE_FIRMWARE("amdgpu/aldebaran_sjt_mec2.bin");
 #define mmGOLDEN_TSC_COUNT_LOWER_Renoir                0x0026
 #define mmGOLDEN_TSC_COUNT_LOWER_Renoir_BASE_IDX       1
 
+#define mmGOLDEN_TSC_COUNT_UPPER_Raven   0x007a
+#define mmGOLDEN_TSC_COUNT_UPPER_Raven_BASE_IDX 0
+#define mmGOLDEN_TSC_COUNT_LOWER_Raven   0x007b
+#define mmGOLDEN_TSC_COUNT_LOWER_Raven_BASE_IDX 0
+
+#define mmGOLDEN_TSC_COUNT_UPPER_Raven2   0x0068
+#define mmGOLDEN_TSC_COUNT_UPPER_Raven2_BASE_IDX 0
+#define mmGOLDEN_TSC_COUNT_LOWER_Raven2   0x0069
+#define mmGOLDEN_TSC_COUNT_LOWER_Raven2_BASE_IDX 0
+
 enum ta_ras_gfx_subblock {
        /*CPC*/
        TA_RAS_BLOCK__GFX_CPC_INDEX_START = 0,
@@ -3988,6 +3998,36 @@ static uint64_t gfx_v9_0_get_gpu_clock_counter(struct amdgpu_device *adev)
                preempt_enable();
                clock = clock_lo | (clock_hi << 32ULL);
                break;
+       case IP_VERSION(9, 1, 0):
+               preempt_disable();
+               clock_hi = RREG32_SOC15_NO_KIQ(PWR, 0, mmGOLDEN_TSC_COUNT_UPPER_Raven);
+               clock_lo = RREG32_SOC15_NO_KIQ(PWR, 0, mmGOLDEN_TSC_COUNT_LOWER_Raven);
+               hi_check = RREG32_SOC15_NO_KIQ(PWR, 0, mmGOLDEN_TSC_COUNT_UPPER_Raven);
+               /* The PWR TSC clock frequency is 100MHz, which sets 32-bit carry over
+                * roughly every 42 seconds.
+                */
+               if (hi_check != clock_hi) {
+                       clock_lo = RREG32_SOC15_NO_KIQ(PWR, 0, mmGOLDEN_TSC_COUNT_LOWER_Raven);
+                       clock_hi = hi_check;
+               }
+               preempt_enable();
+               clock = clock_lo | (clock_hi << 32ULL);
+               break;
+       case IP_VERSION(9, 2, 2):
+               preempt_disable();
+               clock_hi = RREG32_SOC15_NO_KIQ(PWR, 0, mmGOLDEN_TSC_COUNT_UPPER_Raven2);
+               clock_lo = RREG32_SOC15_NO_KIQ(PWR, 0, mmGOLDEN_TSC_COUNT_LOWER_Raven2);
+               hi_check = RREG32_SOC15_NO_KIQ(PWR, 0, mmGOLDEN_TSC_COUNT_UPPER_Raven2);
+               /* The PWR TSC clock frequency is 100MHz, which sets 32-bit carry over
+                * roughly every 42 seconds.
+                */
+               if (hi_check != clock_hi) {
+                       clock_lo = RREG32_SOC15_NO_KIQ(PWR, 0, mmGOLDEN_TSC_COUNT_LOWER_Raven2);
+                       clock_hi = hi_check;
+               }
+               preempt_enable();
+               clock = clock_lo | (clock_hi << 32ULL);
+               break;
        default:
                amdgpu_gfx_off_ctrl(adev, false);
                mutex_lock(&adev->gfx.gpu_clock_mutex);