ARM: dts: imx6qdl-wandboard: add scl/sda gpios definitions for i2c bus recovery

The i2c bus on imx6qdl-wandboard has intermittent issues where SDA can freeze
on low level at the end of transaction so the bus can no longer work. This
impacts reading of EDID data leading to incorrect TV resolution and no audio.

This scenario is improved by adding scl/sda gpios definitions to implement the
i2c bus recovery mechanism.

Signed-off-by: Dima Azarkin <azdmg@outlook.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index c070893c509ee2dbbab43adbcdb417028c3776b0..b62a0dbb033ff19487bdd0083e033c01d6d05c43 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -97,15 +97,21 @@
 
 &i2c1 {
        clock-frequency = <100000>;
-       pinctrl-names = "default";
+       pinctrl-names = "default", "gpio";
        pinctrl-0 = <&pinctrl_i2c1>;
+       pinctrl-1 = <&pinctrl_i2c1_gpio>;
+       scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+       sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
        status = "okay";
 };
 
 &i2c2 {
        clock-frequency = <100000>;
-       pinctrl-names = "default";
+       pinctrl-names = "default", "gpio";
        pinctrl-0 = <&pinctrl_i2c2>;
+       pinctrl-1 = <&pinctrl_i2c2_gpio>;
+       scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+       sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
        status = "okay";
 
        codec: sgtl5000@a {
@@ -185,6 +191,13 @@
                        >;
                };
 
+               pinctrl_i2c1_gpio: i2c1gpiogrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D21__GPIO3_IO21          0x4001b8b0
+                               MX6QDL_PAD_EIM_D28__GPIO3_IO28          0x4001b8b0
+                       >;
+               };
+
                pinctrl_i2c2: i2c2grp {
                        fsl,pins = <
                                MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
@@ -192,6 +205,13 @@
                        >;
                };
 
+               pinctrl_i2c2_gpio: i2c2gpiogrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL3__GPIO4_IO12         0x4001b8b0
+                               MX6QDL_PAD_KEY_ROW3__GPIO4_IO13         0x4001b8b0
+                       >;
+               };
+
                pinctrl_mclk: mclkgrp {
                        fsl,pins = <
                                MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0