m68k: remove check for CONFIG_BSEIP

There used to be a Kconfig symbol BSEIP. It was PPC specific and was
removed in v2.6.27. So the check for CONFIG_BSEIP can be removed. This
means a few defines will be removed. None of the macros involved are
used, so no one should care.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

diff --git a/arch/m68k/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h
index 66a36bd51aa12d120d1502610e0885411a3058a2..c67e09279ea96930a45896df6d77d0f52f645cbe 100644 (file)
--- a/arch/m68k/include/asm/commproc.h
+++ b/arch/m68k/include/asm/commproc.h
@@ -480,28 +480,6 @@ typedef struct scc_enet {
 #define SICR_ENET_CLKRT        ((uint)0x0000003d)
 #endif
 
-#ifdef CONFIG_BSEIP
-/* This ENET stuff is for the MPC823 with ethernet on SCC2.
- * This is unique to the BSE ip-Engine board.
- */
-#define PA_ENET_RXD    ((ushort)0x0004)
-#define PA_ENET_TXD    ((ushort)0x0008)
-#define PA_ENET_TCLK   ((ushort)0x0100)
-#define PA_ENET_RCLK   ((ushort)0x0200)
-#define PB_ENET_TENA   ((uint)0x00002000)
-#define PC_ENET_CLSN   ((ushort)0x0040)
-#define PC_ENET_RENA   ((ushort)0x0080)
-
-/* BSE uses port B and C bits for PHY control also.
-*/
-#define PB_BSE_POWERUP ((uint)0x00000004)
-#define PB_BSE_FDXDIS  ((uint)0x00008000)
-#define PC_BSE_LOOPBACK        ((ushort)0x0800)
-
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT        ((uint)0x00002c00)
-#endif
-
 /* SCC Event register as used by Ethernet.
 */
 #define SCCE_ENET_GRA  ((ushort)0x0080)        /* Graceful stop complete */