USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().

commit 37d2a36394d954413a495da61da1b2a51ecd28ab upstream.

syzbot is reporting hung task at wdm_flush() [1], for there is a circular
dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever
waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget
cannot be called unless close() for /dev/cdc-wdm0 completes.

Tetsuo Handa considered that such circular dependency is an usage error [2]
which corresponds to an unresponding broken hardware [3]. But Alan Stern
responded that we should be prepared for such hardware [4]. Therefore,
this patch changes wdm_flush() to use wait_event_interruptible_timeout()
which gives up after 30 seconds, for hardware that remains silent must be
ignored. The 30 seconds are coming out of thin air.

Changing wait_event() to wait_event_interruptible_timeout() makes error
reporting from close() syscall less reliable. To compensate it, this patch
also implements wdm_fsync() which does not use timeout. Those who want to
be very sure that data has gone out to the device are now advised to call
fsync(), with a caveat that fsync() can return -EINVAL when running on
older kernels which do not implement wdm_fsync().

This patch also fixes three more problems (listed below) found during
exhaustive discussion and testing.

  Since multiple threads can concurrently call wdm_write()/wdm_flush(),
  we need to use wake_up_all() whenever clearing WDM_IN_USE in order to
  make sure that all waiters are woken up. Also, error reporting needs
  to use fetch-and-clear approach in order not to report same error for
  multiple times.

  Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well
  check WDM_DISCONNECTING.

  In wdm_flush(), since locks are not held, it is not safe to dereference
  desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus,
  remove dev_err() from wdm_flush().

[1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186
[2] https://lkml.kernel.org/r/27b7545e-8f41-10b8-7c02-e35a08eb1611@i-love.sakura.ne.jp
[3] https://lkml.kernel.org/r/79ba410f-e0ef-2465-b94f-6b9a4a82adf5@i-love.sakura.ne.jp
[4] https://lkml.kernel.org/r/20200530011040.GB12419@rowland.harvard.edu
[5] https://lkml.kernel.org/r/c85331fc-874c-6e46-a77f-0ef1dc075308@i-love.sakura.ne.jp

Reported-by: syzbot <syzbot+854768b99f19e89d7f81@syzkaller.appspotmail.com>
Cc: stable <stable@vger.kernel.org>
Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200928141755.3476-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 70afb2ca1eabde070ff163ce7dd96fce5da93f71..9875e2fe33db25e120fc453fae030513d0c6c46f 100644 (file)
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -58,6 +58,9 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 
 #define WDM_MAX                        16
 
+/* we cannot wait forever at flush() */
+#define WDM_FLUSH_TIMEOUT      (30 * HZ)
+
 /* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
 #define WDM_DEFAULT_BUFSIZE    256
 
@@ -151,7 +154,7 @@ static void wdm_out_callback(struct urb *urb)
        kfree(desc->outbuf);
        desc->outbuf = NULL;
        clear_bit(WDM_IN_USE, &desc->flags);
-       wake_up(&desc->wait);
+       wake_up_all(&desc->wait);
 }
 
 static void wdm_in_callback(struct urb *urb)
@@ -393,6 +396,9 @@ static ssize_t wdm_write
        if (test_bit(WDM_RESETTING, &desc->flags))
                r = -EIO;
 
+       if (test_bit(WDM_DISCONNECTING, &desc->flags))
+               r = -ENODEV;
+
        if (r < 0) {
                rv = r;
                goto out_free_mem_pm;
@@ -424,6 +430,7 @@ static ssize_t wdm_write
        if (rv < 0) {
                desc->outbuf = NULL;
                clear_bit(WDM_IN_USE, &desc->flags);
+               wake_up_all(&desc->wait); /* for wdm_wait_for_response() */
                dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
                rv = usb_translate_errors(rv);
                goto out_free_mem_pm;
@@ -583,28 +590,58 @@ err:
        return rv;
 }
 
-static int wdm_flush(struct file *file, fl_owner_t id)
+static int wdm_wait_for_response(struct file *file, long timeout)
 {
        struct wdm_device *desc = file->private_data;
+       long rv; /* Use long here because (int) MAX_SCHEDULE_TIMEOUT < 0. */
+
+       /*
+        * Needs both flags. We cannot do with one because resetting it would
+        * cause a race with write() yet we need to signal a disconnect.
+        */
+       rv = wait_event_interruptible_timeout(desc->wait,
+                             !test_bit(WDM_IN_USE, &desc->flags) ||
+                             test_bit(WDM_DISCONNECTING, &desc->flags),
+                             timeout);
 
-       wait_event(desc->wait,
-                       /*
-                        * needs both flags. We cannot do with one
-                        * because resetting it would cause a race
-                        * with write() yet we need to signal
-                        * a disconnect
-                        */
-                       !test_bit(WDM_IN_USE, &desc->flags) ||
-                       test_bit(WDM_DISCONNECTING, &desc->flags));
-
-       /* cannot dereference desc->intf if WDM_DISCONNECTING */
+       /*
+        * To report the correct error. This is best effort.
+        * We are inevitably racing with the hardware.
+        */
        if (test_bit(WDM_DISCONNECTING, &desc->flags))
                return -ENODEV;
-       if (desc->werr < 0)
-               dev_err(&desc->intf->dev, "Error in flush path: %d\n",
-                       desc->werr);
+       if (!rv)
+               return -EIO;
+       if (rv < 0)
+               return -EINTR;
+
+       spin_lock_irq(&desc->iuspin);
+       rv = desc->werr;
+       desc->werr = 0;
+       spin_unlock_irq(&desc->iuspin);
+
+       return usb_translate_errors(rv);
+
+}
+
+/*
+ * You need to send a signal when you react to malicious or defective hardware.
+ * Also, don't abort when fsync() returned -EINVAL, for older kernels which do
+ * not implement wdm_flush() will return -EINVAL.
+ */
+static int wdm_fsync(struct file *file, loff_t start, loff_t end, int datasync)
+{
+       return wdm_wait_for_response(file, MAX_SCHEDULE_TIMEOUT);
+}
 
-       return usb_translate_errors(desc->werr);
+/*
+ * Same with wdm_fsync(), except it uses finite timeout in order to react to
+ * malicious or defective hardware which ceased communication after close() was
+ * implicitly called due to process termination.
+ */
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+       return wdm_wait_for_response(file, WDM_FLUSH_TIMEOUT);
 }
 
 static __poll_t wdm_poll(struct file *file, struct poll_table_struct *wait)
@@ -729,6 +766,7 @@ static const struct file_operations wdm_fops = {
        .owner =        THIS_MODULE,
        .read =         wdm_read,
        .write =        wdm_write,
+       .fsync =        wdm_fsync,
        .open =         wdm_open,
        .flush =        wdm_flush,
        .release =      wdm_release,