usb: chipidea: i.MX: use devm_usb_get_phy_by_phandle to get phy

This patch converts the driver to use devm_usb_get_phy_by_phandle
which makes the code smaller and a bit simpler.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 18d83abac7cdfc6f940ff736f792dd49d0e11db1..7e6f0674bee38f5196f68a03dd1719bd81407f8c 100644 (file)
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -28,7 +28,6 @@
        ((struct usb_phy *)platform_get_drvdata(pdev))
 
 struct ci13xxx_imx_data {
-       struct device_node *phy_np;
        struct usb_phy *phy;
        struct platform_device *ci_pdev;
        struct clk *clk;
@@ -97,9 +96,9 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
                                  CI13XXX_PULLUP_ON_VBUS |
                                  CI13XXX_DISABLE_STREAMING,
        };
-       struct platform_device *phy_pdev;
        struct resource *res;
        int ret;
+       struct usb_phy *phy;
 
        if (of_find_property(pdev->dev.of_node, "fsl,usbmisc", NULL)
                && !usbmisc_ops)
@@ -131,18 +130,16 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
                return ret;
        }
 
-       data->phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0);
-       if (data->phy_np) {
-               phy_pdev = of_find_device_by_node(data->phy_np);
-               if (phy_pdev) {
-                       struct usb_phy *phy;
-                       phy = pdev_to_phy(phy_pdev);
-                       if (phy &&
-                           try_module_get(phy_pdev->dev.driver->owner)) {
-                               usb_phy_init(phy);
-                               data->phy = phy;
-                       }
+       phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
+       if (!IS_ERR(phy)) {
+               ret = usb_phy_init(phy);
+               if (ret) {
+                       dev_err(&pdev->dev, "unable to init phy: %d\n", ret);
+                       goto err_clk;
                }
+       } else if (PTR_ERR(phy) == -EPROBE_DEFER) {
+               ret = -EPROBE_DEFER;
+               goto err_clk;
        }
 
        /* we only support host now, so enable vbus here */
@@ -153,7 +150,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
                        dev_err(&pdev->dev,
                                "Failed to enable vbus regulator, err=%d\n",
                                ret);
-                       goto put_np;
+                       goto err_clk;
                }
        } else {
                data->reg_vbus = NULL;
@@ -207,9 +204,7 @@ disable_device:
 err:
        if (data->reg_vbus)
                regulator_disable(data->reg_vbus);
-put_np:
-       if (data->phy_np)
-               of_node_put(data->phy_np);
+err_clk:
        clk_disable_unprepare(data->clk);
        return ret;
 }
@@ -229,9 +224,6 @@ static int ci13xxx_imx_remove(struct platform_device *pdev)
                module_put(data->phy->dev->driver->owner);
        }
 
-       if (data->phy_np)
-               of_node_put(data->phy_np);
-
        clk_disable_unprepare(data->clk);
 
        return 0;