MIPS: ralink: dts: gardena_smart_gateway_mt7688: Limit UART1

The radio module asserts CTS when its RX buffer has 10 bytes left.
Putting just 8 instead of 16 bytes into the UART1 TX buffer on the Linux
side ensures to not overflow the RX buffer on the radio module side.

Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org

diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
index 2d979eb744dc78666ddceaca3189460421515aec..6069b33cf09f202fed0561e3c58602d9e76ba1e5 100644 (file)
--- a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -177,6 +177,9 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinmux_i2s_gpio>;         /* GPIO0..3 */
 
+       fifo-size = <8>;
+       tx-threshold = <8>;
+
        rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
        cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 };