serial: add support for OX16PCI958 card

Signed-off-by: Lytochkin Boris <lytboris@gmail.com>
Tested-by: Lytochkin Boris <lytboris@gmail.com>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 746a44621d9157e3a50448ce60e577d66dfc1246..53be4d35a0aa171dde05ca5628d53a2b422443c7 100644 (file)
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -994,6 +994,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_TITAN_800E       0xA014
 #define PCI_DEVICE_ID_TITAN_200EI      0xA016
 #define PCI_DEVICE_ID_TITAN_200EISI    0xA017
+#define PCI_DEVICE_ID_OXSEMI_16PCI958  0x9538
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584        0x1584
@@ -1542,6 +1543,8 @@ enum pci_board_num_t {
        pbn_b2_4_921600,
        pbn_b2_8_921600,
 
+       pbn_b2_8_1152000,
+
        pbn_b2_bt_1_115200,
        pbn_b2_bt_2_115200,
        pbn_b2_bt_4_115200,
@@ -1960,6 +1963,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
                .uart_offset    = 8,
        },
 
+       [pbn_b2_8_1152000] = {
+               .flags          = FL_BASE2,
+               .num_ports      = 8,
+               .base_baud      = 1152000,
+               .uart_offset    = 8,
+       },
+
        [pbn_b2_bt_1_115200] = {
                .flags          = FL_BASE2|FL_BASE_BARS,
                .num_ports      = 1,
@@ -2875,6 +2885,9 @@ static struct pci_device_id serial_pci_tbl[] = {
        {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
                PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b0_bt_2_921600 },
+       {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
+               PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+               pbn_b2_8_1152000 },
 
        /*
         * Oxford Semiconductor Inc. Tornado PCI express device range.