--- /dev/null
+/*
+ * The code below came from Tony Luck's mcelog code,
+ * released under GNU Public General License, v.2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <string.h>
+#include <stdio.h>
+
+#include "ras-mce-handler.h"
+#include "bitfield.h"
+
+/* See IA32 SDM Vol3B Table 16-24 */
+
+static char *pcu_1[] = {
+ [0x00] = "No Error",
+ [0x09] = "MC_MESSAGE_CHANNEL_TIMEOUT",
+ [0x13] = "MC_DMI_TRAINING_TIMEOUT",
+ [0x15] = "MC_DMI_CPU_RESET_ACK_TIMEOUT",
+ [0x1E] = "MC_VR_ICC_MAX_LT_FUSED_ICC_MAX",
+ [0x25] = "MC_SVID_COMMAN_TIMEOUT",
+ [0x26] = "MCA_PKGC_DIRECT_WAKE_RING_TIMEOUT",
+ [0x29] = "MC_VR_VOUT_MAC_LT_FUSED_SVID",
+ [0x2B] = "MC_PKGC_WATCHDOG_HANG_CBZ_DOWN",
+ [0x2C] = "MC_PKGC_WATCHDOG_HANG_CBZ_UP",
+ [0x44] = "MC_CRITICAL_VR_FAILED",
+ [0x46] = "MC_VID_RAMP_DOWN_FAILED",
+ [0x49] = "MC_SVID_WRITE_REG_VOUT_MAX_FAILED",
+ [0x4B] = "MC_BOOT_VID_TIMEOUT_DRAM_0",
+ [0x4F] = "MC_SVID_COMMAND_ERROR",
+ [0x52] = "MC_FIVR_CATAS_OVERVOL_FAULT",
+ [0x53] = "MC_FIVR_CATAS_OVERCUR_FAULT",
+ [0x57] = "MC_SVID_PKGC_REQUEST_FAILED",
+ [0x58] = "MC_SVID_IMON_REQUEST_FAILED",
+ [0x59] = "MC_SVID_ALERT_REQUEST_FAILED",
+ [0x62] = "MC_INVALID_PKGS_RSP_QPI",
+ [0x64] = "MC_INVALID_PKG_STATE_CONFIG",
+ [0x67] = "MC_HA_IMC_RW_BLOCK_ACK_TIMEOUT",
+ [0x6A] = "MC_MSGCH_PMREQ_CMP_TIMEOUT",
+ [0x72] = "MC_WATCHDOG_TIMEOUT_PKGS_MASTER",
+ [0x81] = "MC_RECOVERABLE_DIE_THERMAL_TOO_HOT"
+};
+
+static struct field pcu_mc4[] = {
+ FIELD(24, pcu_1),
+ {}
+};
+
+/* See IA32 SDM Vol3B Table 16-18 */
+
+static struct field memctrl_mc9[] = {
+ SBITFIELD(16, "Address parity error"),
+ SBITFIELD(17, "HA Wrt buffer Data parity error"),
+ SBITFIELD(18, "HA Wrt byte enable parity error"),
+ SBITFIELD(19, "Corrected patrol scrub error"),
+ SBITFIELD(20, "Uncorrected patrol scrub error"),
+ SBITFIELD(21, "Corrected spare error"),
+ SBITFIELD(22, "Uncorrected spare error"),
+ SBITFIELD(23, "Corrected memory read error"),
+ SBITFIELD(24, "iMC, WDB, parity errors"),
+ {}
+};
+
+void broadwell_de_decode_model(struct ras_events *ras, struct mce_event *e)
+{
+ uint64_t status = e->status;
+ uint32_t mca = status & 0xffff;
+ unsigned rank0 = -1, rank1 = -1, chan;
+
+ switch (e->bank) {
+ case 4:
+ switch (EXTRACT(status, 0, 15) & ~(1ull << 12)) {
+ case 0x402: case 0x403:
+ mce_snprintf(e->mcastatus_msg, "Internal errors ");
+ break;
+ case 0x406:
+ mce_snprintf(e->mcastatus_msg, "Intel TXT errors ");
+ break;
+ case 0x407:
+ mce_snprintf(e->mcastatus_msg, "Other UBOX Internal errors ");
+ break;
+ }
+ if (EXTRACT(status, 16, 19) & 3)
+ mce_snprintf(e->mcastatus_msg, "PCU internal error ");
+ if (EXTRACT(status, 20, 23) & 4)
+ mce_snprintf(e->mcastatus_msg, "Ubox error ");
+ decode_bitfield(e, status, pcu_mc4);
+ break;
+ case 9: case 10:
+ mce_snprintf(e->mcastatus_msg, "MemCtrl: ");
+ decode_bitfield(e, status, memctrl_mc9);
+ break;
+ }
+
+ /*
+ * Memory error specific code. Returns if the error is not a MC one
+ */
+
+ /* Check if the error is at the memory controller */
+ if ((mca >> 7) != 1)
+ return;
+
+ /* Ignore unless this is an corrected extended error from an iMC bank */
+ if (e->bank < 9 || e->bank > 16 || (status & MCI_STATUS_UC) ||
+ !test_prefix(7, status & 0xefff))
+ return;
+
+ /*
+ * Parse the reported channel and ranks
+ */
+
+ chan = EXTRACT(status, 0, 3);
+ if (chan == 0xf)
+ return;
+
+ mce_snprintf(e->mc_location, "memory_channel=%d", chan);
+
+ if (EXTRACT(e->misc, 62, 62)) {
+ rank0 = EXTRACT(e->misc, 46, 50);
+ if (EXTRACT(e->misc, 63, 63))
+ rank1 = EXTRACT(e->misc, 51, 55);
+ }
+
+ /*
+ * FIXME: The conversion from rank to dimm requires to parse the
+ * DMI tables and call failrank2dimm().
+ */
+ if (rank0 != -1 && rank1 != -1)
+ mce_snprintf(e->mc_location, "ranks=%d and %d",
+ rank0, rank1);
+ else if (rank0 != -1)
+ mce_snprintf(e->mc_location, "rank=%d", rank0);
+}