m68knommu: make ColdFire M532x platform support more v3 generic

The M532x CPU platform support can be used on more ColdFire CPU families
than just the 532x types. So rename and reconfigure it to reflect that.
The ColdFire 537x family has virtualy identical internals to the 532x,
and so it will be able to share this code when we add support for them.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

diff --git a/arch/m68k/platform/coldfire/Makefile b/arch/m68k/platform/coldfire/Makefile
index 02591a109f8c0965ffea5116fbfec998078a6109..68f0fac60099277eac637851f3415e092c8fb921 100644 (file)
--- a/arch/m68k/platform/coldfire/Makefile
+++ b/arch/m68k/platform/coldfire/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_M527x)   += m527x.o pit.o intc-2.o reset.o
 obj-$(CONFIG_M5272)    += m5272.o intc-5272.o timers.o
 obj-$(CONFIG_M528x)    += m528x.o pit.o intc-2.o reset.o
 obj-$(CONFIG_M5307)    += m5307.o timers.o intc.o reset.o
-obj-$(CONFIG_M532x)    += m532x.o timers.o intc-simr.o reset.o
+obj-$(CONFIG_M53xx)    += m53xx.o timers.o intc-simr.o reset.o
 obj-$(CONFIG_M5407)    += m5407.o timers.o intc.o reset.o
 obj-$(CONFIG_M54xx)    += m54xx.o sltimers.o intc-2.o
 obj-$(CONFIG_M5441x)   += m5441x.o pit.o intc-simr.o reset.o

diff --git a/arch/m68k/platform/coldfire/m532x.c b/arch/m68k/platform/coldfire/m53xx.c
similarity index 98%
rename from arch/m68k/platform/coldfire/m532x.c
rename to arch/m68k/platform/coldfire/m53xx.c
index 7951d1d43357a16ac953b584f71c5c7efd6bd526..638382e6bc62a930da9aa84da73dd8be662e3d2e 100644 (file)
--- a/arch/m68k/platform/coldfire/m532x.c
+++ b/arch/m68k/platform/coldfire/m53xx.c
@@ -1,7 +1,7 @@
 /***************************************************************************/
 
 /*
- *     linux/arch/m68knommu/platform/532x/config.c
+ *     m53xx.c -- platform support for ColdFire 53xx based boards
  *
  *     Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
  *     Copyright (C) 2000, Lineo (www.lineo.com)
@@ -153,7 +153,7 @@ static struct clk * const disable_clks[] __initconst = {
 };
 
 
-static void __init m532x_clk_init(void)
+static void __init m53xx_clk_init(void)
 {
        unsigned i;
 
@@ -169,7 +169,7 @@ static void __init m532x_clk_init(void)
 
 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
-static void __init m532x_qspi_init(void)
+static void __init m53xx_qspi_init(void)
 {
        /* setup QSPS pins for QSPI with gpio CS control */
        writew(0x01f0, MCFGPIO_PAR_QSPI);
@@ -179,7 +179,7 @@ static void __init m532x_qspi_init(void)
 
 /***************************************************************************/
 
-static void __init m532x_uarts_init(void)
+static void __init m53xx_uarts_init(void)
 {
        /* UART GPIO initialization */
        writew(readw(MCFGPIO_PAR_UART) | 0x0FFF, MCFGPIO_PAR_UART);
@@ -187,7 +187,7 @@ static void __init m532x_uarts_init(void)
 
 /***************************************************************************/
 
-static void __init m532x_fec_init(void)
+static void __init m53xx_fec_init(void)
 {
        u8 v;
 
@@ -217,11 +217,11 @@ void __init config_BSP(char *commandp, int size)
        }
 #endif
        mach_sched_init = hw_timer_init;
-       m532x_clk_init();
-       m532x_uarts_init();
-       m532x_fec_init();
+       m53xx_clk_init();
+       m53xx_uarts_init();
+       m53xx_fec_init();
 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-       m532x_qspi_init();
+       m53xx_qspi_init();
 #endif
 
 #ifdef CONFIG_BDM_DISABLE