#error only <linux/bitops.h> can be included directly
 #endif
 
-unsigned long ___set_bit(unsigned long *addr, unsigned long mask);
-unsigned long ___clear_bit(unsigned long *addr, unsigned long mask);
-unsigned long ___change_bit(unsigned long *addr, unsigned long mask);
+unsigned long sp32___set_bit(unsigned long *addr, unsigned long mask);
+unsigned long sp32___clear_bit(unsigned long *addr, unsigned long mask);
+unsigned long sp32___change_bit(unsigned long *addr, unsigned long mask);
 
 /*
  * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0'
        ADDR = ((unsigned long *) addr) + (nr >> 5);
        mask = 1 << (nr & 31);
 
-       return ___set_bit(ADDR, mask) != 0;
+       return sp32___set_bit(ADDR, mask) != 0;
 }
 
 static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
        ADDR = ((unsigned long *) addr) + (nr >> 5);
        mask = 1 << (nr & 31);
 
-       (void) ___set_bit(ADDR, mask);
+       (void) sp32___set_bit(ADDR, mask);
 }
 
 static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
        ADDR = ((unsigned long *) addr) + (nr >> 5);
        mask = 1 << (nr & 31);
 
-       return ___clear_bit(ADDR, mask) != 0;
+       return sp32___clear_bit(ADDR, mask) != 0;
 }
 
 static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
        ADDR = ((unsigned long *) addr) + (nr >> 5);
        mask = 1 << (nr & 31);
 
-       (void) ___clear_bit(ADDR, mask);
+       (void) sp32___clear_bit(ADDR, mask);
 }
 
 static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
        ADDR = ((unsigned long *) addr) + (nr >> 5);
        mask = 1 << (nr & 31);
 
-       return ___change_bit(ADDR, mask) != 0;
+       return sp32___change_bit(ADDR, mask) != 0;
 }
 
 static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
        ADDR = ((unsigned long *) addr) + (nr >> 5);
        mask = 1 << (nr & 31);
 
-       (void) ___change_bit(ADDR, mask);
+       (void) sp32___change_bit(ADDR, mask);
 }
 
 #include <asm-generic/bitops/non-atomic.h>
 
 }
 EXPORT_SYMBOL(arch_atomic_set);
 
-unsigned long ___set_bit(unsigned long *addr, unsigned long mask)
+unsigned long sp32___set_bit(unsigned long *addr, unsigned long mask)
 {
        unsigned long old, flags;
 
 
        return old & mask;
 }
-EXPORT_SYMBOL(___set_bit);
+EXPORT_SYMBOL(sp32___set_bit);
 
-unsigned long ___clear_bit(unsigned long *addr, unsigned long mask)
+unsigned long sp32___clear_bit(unsigned long *addr, unsigned long mask)
 {
        unsigned long old, flags;
 
 
        return old & mask;
 }
-EXPORT_SYMBOL(___clear_bit);
+EXPORT_SYMBOL(sp32___clear_bit);
 
-unsigned long ___change_bit(unsigned long *addr, unsigned long mask)
+unsigned long sp32___change_bit(unsigned long *addr, unsigned long mask)
 {
        unsigned long old, flags;
 
 
        return old & mask;
 }
-EXPORT_SYMBOL(___change_bit);
+EXPORT_SYMBOL(sp32___change_bit);
 
 unsigned long __cmpxchg_u32(volatile u32 *ptr, u32 old, u32 new)
 {
 
 #include <linux/instrumented.h>
 
 /**
- * __set_bit - Set a bit in memory
+ * ___set_bit - Set a bit in memory
  * @nr: the bit to set
  * @addr: the address to start counting from
  *
  * succeeds.
  */
 static __always_inline void
-__set_bit(unsigned long nr, volatile unsigned long *addr)
+___set_bit(unsigned long nr, volatile unsigned long *addr)
 {
        instrument_write(addr + BIT_WORD(nr), sizeof(long));
        arch___set_bit(nr, addr);
 }
 
 /**
- * __clear_bit - Clears a bit in memory
+ * ___clear_bit - Clears a bit in memory
  * @nr: the bit to clear
  * @addr: the address to start counting from
  *
  * succeeds.
  */
 static __always_inline void
-__clear_bit(unsigned long nr, volatile unsigned long *addr)
+___clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
        instrument_write(addr + BIT_WORD(nr), sizeof(long));
        arch___clear_bit(nr, addr);
 }
 
 /**
- * __change_bit - Toggle a bit in memory
+ * ___change_bit - Toggle a bit in memory
  * @nr: the bit to change
  * @addr: the address to start counting from
  *
  * succeeds.
  */
 static __always_inline void
-__change_bit(unsigned long nr, volatile unsigned long *addr)
+___change_bit(unsigned long nr, volatile unsigned long *addr)
 {
        instrument_write(addr + BIT_WORD(nr), sizeof(long));
        arch___change_bit(nr, addr);
 }
 
 /**
- * __test_and_set_bit - Set a bit and return its old value
+ * ___test_and_set_bit - Set a bit and return its old value
  * @nr: Bit to set
  * @addr: Address to count from
  *
  * can appear to succeed but actually fail.
  */
 static __always_inline bool
-__test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+___test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
 {
        __instrument_read_write_bitop(nr, addr);
        return arch___test_and_set_bit(nr, addr);
 }
 
 /**
- * __test_and_clear_bit - Clear a bit and return its old value
+ * ___test_and_clear_bit - Clear a bit and return its old value
  * @nr: Bit to clear
  * @addr: Address to count from
  *
  * can appear to succeed but actually fail.
  */
 static __always_inline bool
-__test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+___test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
        __instrument_read_write_bitop(nr, addr);
        return arch___test_and_clear_bit(nr, addr);
 }
 
 /**
- * __test_and_change_bit - Change a bit and return its old value
+ * ___test_and_change_bit - Change a bit and return its old value
  * @nr: Bit to change
  * @addr: Address to count from
  *
  * can appear to succeed but actually fail.
  */
 static __always_inline bool
-__test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 {
        __instrument_read_write_bitop(nr, addr);
        return arch___test_and_change_bit(nr, addr);
 }
 
 /**
- * test_bit - Determine whether a bit is set
+ * _test_bit - Determine whether a bit is set
  * @nr: bit number to test
  * @addr: Address to start counting from
  */
 static __always_inline bool
-test_bit(unsigned long nr, const volatile unsigned long *addr)
+_test_bit(unsigned long nr, const volatile unsigned long *addr)
 {
        instrument_atomic_read(addr + BIT_WORD(nr), sizeof(long));
        return arch_test_bit(nr, addr);
 
 #ifndef __ASM_GENERIC_BITOPS_NON_INSTRUMENTED_NON_ATOMIC_H
 #define __ASM_GENERIC_BITOPS_NON_INSTRUMENTED_NON_ATOMIC_H
 
-#define __set_bit              arch___set_bit
-#define __clear_bit            arch___clear_bit
-#define __change_bit           arch___change_bit
+#define ___set_bit             arch___set_bit
+#define ___clear_bit           arch___clear_bit
+#define ___change_bit          arch___change_bit
 
-#define __test_and_set_bit     arch___test_and_set_bit
-#define __test_and_clear_bit   arch___test_and_clear_bit
-#define __test_and_change_bit  arch___test_and_change_bit
+#define ___test_and_set_bit    arch___test_and_set_bit
+#define ___test_and_clear_bit  arch___test_and_clear_bit
+#define ___test_and_change_bit arch___test_and_change_bit
 
-#define test_bit               arch_test_bit
+#define _test_bit              arch_test_bit
 
 #endif /* __ASM_GENERIC_BITOPS_NON_INSTRUMENTED_NON_ATOMIC_H */
 
 extern unsigned int __sw_hweight32(unsigned int w);
 extern unsigned long __sw_hweight64(__u64 w);
 
+/*
+ * Defined here because those may be needed by architecture-specific static
+ * inlines.
+ */
+
 #include <asm-generic/bitops/generic-non-atomic.h>
 
+#define bitop(op, nr, addr)                                            \
+       op(nr, addr)
+
+#define __set_bit(nr, addr)            bitop(___set_bit, nr, addr)
+#define __clear_bit(nr, addr)          bitop(___clear_bit, nr, addr)
+#define __change_bit(nr, addr)         bitop(___change_bit, nr, addr)
+#define __test_and_set_bit(nr, addr)   bitop(___test_and_set_bit, nr, addr)
+#define __test_and_clear_bit(nr, addr) bitop(___test_and_clear_bit, nr, addr)
+#define __test_and_change_bit(nr, addr)        bitop(___test_and_change_bit, nr, addr)
+#define test_bit(nr, addr)             bitop(_test_bit, nr, addr)
+
 /*
  * Include this here because some architectures need generic_ffs/fls in
  * scope
 #define __check_bitop_pr(name)                                         \
        static_assert(__same_type(arch_##name, generic_##name) &&       \
                      __same_type(const_##name, generic_##name) &&      \
-                     __same_type(name, generic_##name))
+                     __same_type(_##name, generic_##name))
 
 __check_bitop_pr(__set_bit);
 __check_bitop_pr(__clear_bit);
 
 #include <linux/bits.h>
 
 /**
- * __set_bit - Set a bit in memory
+ * ___set_bit - Set a bit in memory
  * @nr: the bit to set
  * @addr: the address to start counting from
  *
  * may be that only one operation succeeds.
  */
 static __always_inline void
-__set_bit(unsigned long nr, volatile unsigned long *addr)
+___set_bit(unsigned long nr, volatile unsigned long *addr)
 {
        unsigned long mask = BIT_MASK(nr);
        unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
 }
 
 static __always_inline void
-__clear_bit(unsigned long nr, volatile unsigned long *addr)
+___clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
        unsigned long mask = BIT_MASK(nr);
        unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
 }
 
 /**
- * __change_bit - Toggle a bit in memory
+ * ___change_bit - Toggle a bit in memory
  * @nr: the bit to change
  * @addr: the address to start counting from
  *
  * may be that only one operation succeeds.
  */
 static __always_inline void
-__change_bit(unsigned long nr, volatile unsigned long *addr)
+___change_bit(unsigned long nr, volatile unsigned long *addr)
 {
        unsigned long mask = BIT_MASK(nr);
        unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
 }
 
 /**
- * __test_and_set_bit - Set a bit and return its old value
+ * ___test_and_set_bit - Set a bit and return its old value
  * @nr: Bit to set
  * @addr: Address to count from
  *
  * but actually fail.  You must protect multiple accesses with a lock.
  */
 static __always_inline bool
-__test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+___test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
 {
        unsigned long mask = BIT_MASK(nr);
        unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
 }
 
 /**
- * __test_and_clear_bit - Clear a bit and return its old value
+ * ___test_and_clear_bit - Clear a bit and return its old value
  * @nr: Bit to clear
  * @addr: Address to count from
  *
  * but actually fail.  You must protect multiple accesses with a lock.
  */
 static __always_inline bool
-__test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+___test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
        unsigned long mask = BIT_MASK(nr);
        unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
 
 /* WARNING: non atomic and it can be reordered! */
 static __always_inline bool
-__test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 {
        unsigned long mask = BIT_MASK(nr);
        unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
 }
 
 /**
- * test_bit - Determine whether a bit is set
+ * _test_bit - Determine whether a bit is set
  * @nr: bit number to test
  * @addr: Address to start counting from
  */
 static __always_inline bool
-test_bit(unsigned long nr, const volatile unsigned long *addr)
+_test_bit(unsigned long nr, const volatile unsigned long *addr)
 {
        return 1UL & (addr[BIT_WORD(nr)] >> (nr & (BITS_PER_LONG-1)));
 }
 
 extern unsigned int __sw_hweight32(unsigned int w);
 extern unsigned long __sw_hweight64(__u64 w);
 
+/*
+ * Defined here because those may be needed by architecture-specific static
+ * inlines.
+ */
+
+#define bitop(op, nr, addr)                                            \
+       op(nr, addr)
+
+#define __set_bit(nr, addr)            bitop(___set_bit, nr, addr)
+#define __clear_bit(nr, addr)          bitop(___clear_bit, nr, addr)
+#define __change_bit(nr, addr)         bitop(___change_bit, nr, addr)
+#define __test_and_set_bit(nr, addr)   bitop(___test_and_set_bit, nr, addr)
+#define __test_and_clear_bit(nr, addr) bitop(___test_and_clear_bit, nr, addr)
+#define __test_and_change_bit(nr, addr)        bitop(___test_and_change_bit, nr, addr)
+#define test_bit(nr, addr)             bitop(_test_bit, nr, addr)
+
 /*
  * Include this here because some architectures need generic_ffs/fls in
  * scope